Lubricants plastic widely used in the actual processing of plastic, for example kneading, the rolling process, to prevent adhesion of the polymer cartridge suppressing friction and heat, and the load torque decreases kneading, thereby preventing the polymer
material of the heat deterioration. In the WSD PVC flame retardant extrusion molding, to improve flowability, the polymer material and to improve adhesion
of the barrel and the die, to prevent and reduce retentate. Another film but also to improve the appearance and gloss.
Plastic lubricants can be divided into effect, the two plastic lubricants, intenal lubricant is mainly to improve the frictional
heat the metal surface of the polymer melt and processing equipment. Lubricants plastic outer poor compatibility with the polymer is easy to migrate out from the melt, so the lubrication can be formed in a WSD Processing aid thin layer of plastic and metal melt interface. Plastic lubricant has good compatibility with the polymer, intenal lubricant which serves to reduce the effect of cohesion between
the polymer molecules within the polymer, thereby improving the plastic melt in the heat of friction and melt flowability. Commonly used lubricants are stearic acid and salts thereof outside; plastic lubricant is a low molecular weight polymer. A plastic lubricant with different polymers under different processing conditions or exhibit different lubrication, such as high temperature,
high pressure, the lubricant will be squeezed out of the inside and outside of the lubricant becomes.
WSD Chemical is specificaitonal manufacturing plastic chemical in china for 10 years, WSD intenal lubricant and supply all kinds plasic chemicals ,such as Metal soaps, PVC heat stabilizers,PVC plasticizer, Impact modifier,plastic lubricant processing aid , PVC lubricant flame retardant, pigments and optical brightener.
2014年4月15日星期二
2014年4月9日星期三
intenal lubricant viscosity is one of the most important parameters of oil
Viscosity of oil is the most important parameter, which determines the sliding bearing oil film bearing capacity, the friction
power and the sealing capability of the sealing surface. Carrying capacity of high-viscosity lubricants large, easy to maintain
liquid lubrication, but its flow resistance, increasing the Plastic impact modifier power and start the compressor friction resistance. Conversely, a low
viscosity lubricating oil flow resistance is small, less heat generated by friction, it is difficult to form oil film seal is poor.
Mixed with the working fluid and the working fluid is mixed well, the free flow of oil in the system, a smooth return to the
compressor, intenal lubricant to ensure the Calcium stearate normal lubrication of the compressor. Instead, the lubricating oil in the system will
produce stratification, flow resistance is increased in the cycle, the heat transfer to weaken, resulting in insufficient oil
return to the compressor, intenal lubricant properties and thus the reliability of the compressor adverse consequences.
When the cloud point under given conditions, the temperature of the lubricating oil falls below a certain value, the oil begins to
precipitate in the wax, into a turbid state, this is Titanium dioxide rutile called the cloud point temperature of the lubricating oil. Oil cloud point
should be less than the minimum refrigerant evaporation temperature, otherwise precipitated paraffin clog the throttle, or weaken
the effect of the evaporator heat. Even clogged's tube evaporator channels. The maximum temperature in the freezing point of a
given condition, the lubricating oil at the start completely lost its flowability of gravity referred to the freezing point. Easy
come, the freezing point should be as low as possible.
power and the sealing capability of the sealing surface. Carrying capacity of high-viscosity lubricants large, easy to maintain
liquid lubrication, but its flow resistance, increasing the Plastic impact modifier power and start the compressor friction resistance. Conversely, a low
viscosity lubricating oil flow resistance is small, less heat generated by friction, it is difficult to form oil film seal is poor.
Mixed with the working fluid and the working fluid is mixed well, the free flow of oil in the system, a smooth return to the
compressor, intenal lubricant to ensure the Calcium stearate normal lubrication of the compressor. Instead, the lubricating oil in the system will
produce stratification, flow resistance is increased in the cycle, the heat transfer to weaken, resulting in insufficient oil
return to the compressor, intenal lubricant properties and thus the reliability of the compressor adverse consequences.
When the cloud point under given conditions, the temperature of the lubricating oil falls below a certain value, the oil begins to
precipitate in the wax, into a turbid state, this is Titanium dioxide rutile called the cloud point temperature of the lubricating oil. Oil cloud point
should be less than the minimum refrigerant evaporation temperature, otherwise precipitated paraffin clog the throttle, or weaken
the effect of the evaporator heat. Even clogged's tube evaporator channels. The maximum temperature in the freezing point of a
given condition, the lubricating oil at the start completely lost its flowability of gravity referred to the freezing point. Easy
come, the freezing point should be as low as possible.
2014年3月25日星期二
Pack nuclear tribasic lead sulfate is a low- lead WSD PVC lubricant stabilizers
Pack nuclear tribasic lead sulfate is a low- lead PVC heat stabilizers , due to its creative use of nuclear technology package will be is still widely used, a large proportion of the market in the PVC stabilizer stabilizer tribasic lead sulfate coated surfaces made of fine particles of inert filler novel packet core tribasic lead sulfate , significantly organic pigments reducing the toxic levels of lead and maintain their excellent performance and stability. Which are widely used in the processing of PVC pipes, fittings , profiles , wire and cable , pinch and so on.
In this paper, synthetic bag nuclear tribasic lead sulfate for a more in-depth research , experimental study of the optimal synthesis conditions . Methods are inert or semi- inert material selected as the core , its surface is uniformly coated with a layer of a tribasic lead sulfate thickness. Through the experiment, the reaction involved in the process parameters and reaction conditions ( such as reaction temperature, concentration of lead , covering the amount of water to feed ratio ) were optimized to prepare a Optical brightener low lead content package nuclear tribasic lead sulfate with traditional tribasic lead sulfate were compared with experiments. Experimental results show that : In making the overall performance is not affected all aspects of the premise of reducing the lead content of the experiment , thus reducing costs , reducing environmental pollution , broadening the sources of raw materials , with good economic and social benefits.
In this paper, synthetic bag nuclear tribasic lead sulfate for a more in-depth research , experimental study of the optimal synthesis conditions . Methods are inert or semi- inert material selected as the core , its surface is uniformly coated with a layer of a tribasic lead sulfate thickness. Through the experiment, the reaction involved in the process parameters and reaction conditions ( such as reaction temperature, concentration of lead , covering the amount of water to feed ratio ) were optimized to prepare a Optical brightener low lead content package nuclear tribasic lead sulfate with traditional tribasic lead sulfate were compared with experiments. Experimental results show that : In making the overall performance is not affected all aspects of the premise of reducing the lead content of the experiment , thus reducing costs , reducing environmental pollution , broadening the sources of raw materials , with good economic and social benefits.
2014年1月7日星期二
Component structure and application details of anatase titanium dioxide
First, the composition and structure of the rapid development of anatase titanium dioxide industry , anatase titanium dioxide industry has undergone great changes. So I believe the application of its products, netizens have also had a lot of knowledge and understanding. Here are the experts gives a detailed introduction. ( A ) , oil and water-based cosmetics into the anatase titanium dioxide , due to its chemical stability, high refractive index , high hiding power , whiteness is very good, and PVC lubricants pollution , it is widely used in the field of cosmetics , from cosmetic whitening effect.
Features : ①, whiteness, hiding power is very strong. ②, the weather is very strong , suitable sunscreen whitening system. Usage and dosage : ①, widely used in cosmetic whitening powder, foundation, powder , pearl cream , facial mask, sunscreen and other cosmetic products. ②, sufficiently dispersed into the powder medium and then added to the system used , must ensure the uniform dispersion added . ( Two ) , cosmetic grade titanium dioxide Security: This series has been tested not hazardous to humans . And eye contact may cause mild eye discomfort . When in contact with the skin , does not appear adverse reactions. Enamel transparency with anatase titanium dioxide prepared , and has a small mass , impact resistance, good mechanical properties, colorful, easy to pollution.
(C ) Application Guide: wherein the aqueous dispersion of titanium dioxide can be easily added to the water , stir dispersed into the emulsion . Optional polyol is water dispersible carrier , you can easily and most reasonable use with cosmetics . Made of human skin slightly acidic , so weakly acidic skin care products should be matched . Second, the application performance with details Note We know that in everyday life we are exposed from time to time on the application of titanium dioxide , for example, cosmetics, paints and the like, then the performance of Chlorinated paraffin specific applications for titanium dioxide , what does ? Here are some detailed description: 1 , and the main way to improve the stability of anatase titanium dioxide whiteness affect the elements of anatase titanium dioxide whiteness there are many, for example, have an impact mineral resources , but also the impact of equipment and key technologies. Proved by several major factors affecting the degree of whiteness are: quality hydrolysis , removal of the impurity element and calcination conditions .
Anatase titanium dioxide hydrolysis technology , currently in the country have mainly two types of pressurized and atmospheric hydrolysis , hydrolysis and product quality from the point of view, the quality of atmospheric hydrolysis under normal circumstances are better, hydrolysis uniform particle size . To ensure good water quality , must take the concentrated liquid titanium quality indicators , control iron titanium ratio and solid content within the specified range , while increasing control of the operating conditions of hydrolysis . 2 , by surface treatment to improve application performance titanium dioxide powder is a very strong polarity , the hydrophilic nature is oleophobic , if the adsorption air and other types of pollutants , the dispersibility of the water relatively low, we often need to be processed on its surface , the treating agent is used frequently hydrated alumina and hydrated silica. 3, stable particle size distribution of titanium dioxide , titanium dioxide dispersion and improved ways to stearic acid hiding on the titanium dioxide particle size distribution is a more complex indicators , which it has serious implications for the application of titanium dioxide pigment performance and product performance , therefore, dispersion of research we can analyze directly from the particle size distribution. Elements on the titanium dioxide particle size distribution is relatively complex , the first primary particle size hydrolysis , the hydrolysis by the control and regulating method for making the primary particle size can be maintained within a certain range. Followed by calcination temperature , calcination metatitanic process , the particles undergo a transformation of crystalline phase and growth, proper control of temperature, so that the growth of particles can be maintained within a certain range.
Features : ①, whiteness, hiding power is very strong. ②, the weather is very strong , suitable sunscreen whitening system. Usage and dosage : ①, widely used in cosmetic whitening powder, foundation, powder , pearl cream , facial mask, sunscreen and other cosmetic products. ②, sufficiently dispersed into the powder medium and then added to the system used , must ensure the uniform dispersion added . ( Two ) , cosmetic grade titanium dioxide Security: This series has been tested not hazardous to humans . And eye contact may cause mild eye discomfort . When in contact with the skin , does not appear adverse reactions. Enamel transparency with anatase titanium dioxide prepared , and has a small mass , impact resistance, good mechanical properties, colorful, easy to pollution.
(C ) Application Guide: wherein the aqueous dispersion of titanium dioxide can be easily added to the water , stir dispersed into the emulsion . Optional polyol is water dispersible carrier , you can easily and most reasonable use with cosmetics . Made of human skin slightly acidic , so weakly acidic skin care products should be matched . Second, the application performance with details Note We know that in everyday life we are exposed from time to time on the application of titanium dioxide , for example, cosmetics, paints and the like, then the performance of Chlorinated paraffin specific applications for titanium dioxide , what does ? Here are some detailed description: 1 , and the main way to improve the stability of anatase titanium dioxide whiteness affect the elements of anatase titanium dioxide whiteness there are many, for example, have an impact mineral resources , but also the impact of equipment and key technologies. Proved by several major factors affecting the degree of whiteness are: quality hydrolysis , removal of the impurity element and calcination conditions .
Anatase titanium dioxide hydrolysis technology , currently in the country have mainly two types of pressurized and atmospheric hydrolysis , hydrolysis and product quality from the point of view, the quality of atmospheric hydrolysis under normal circumstances are better, hydrolysis uniform particle size . To ensure good water quality , must take the concentrated liquid titanium quality indicators , control iron titanium ratio and solid content within the specified range , while increasing control of the operating conditions of hydrolysis . 2 , by surface treatment to improve application performance titanium dioxide powder is a very strong polarity , the hydrophilic nature is oleophobic , if the adsorption air and other types of pollutants , the dispersibility of the water relatively low, we often need to be processed on its surface , the treating agent is used frequently hydrated alumina and hydrated silica. 3, stable particle size distribution of titanium dioxide , titanium dioxide dispersion and improved ways to stearic acid hiding on the titanium dioxide particle size distribution is a more complex indicators , which it has serious implications for the application of titanium dioxide pigment performance and product performance , therefore, dispersion of research we can analyze directly from the particle size distribution. Elements on the titanium dioxide particle size distribution is relatively complex , the first primary particle size hydrolysis , the hydrolysis by the control and regulating method for making the primary particle size can be maintained within a certain range. Followed by calcination temperature , calcination metatitanic process , the particles undergo a transformation of crystalline phase and growth, proper control of temperature, so that the growth of particles can be maintained within a certain range.
2014年1月3日星期五
PVC lubricants commonly used in the seven species
PVC lubricant is usually tasteless , odorless , non-toxic light yellow waxy solid or flake . Physical indicators: PVC lubricants in the plastics industry is mainly used as mold release agents , plasticizers , antistatic agents , especially for plastic foam products, anti-shrinkage agents. In the production of PVC products as lubricants , and alkyd resin can be used as a modifier , a plasticizer of cellulose nitrate . PVC lubricants commonly used in seven types : calcium ( 1 ) stearic acid : white aluminium stearate powder , melting point 148-155 ℃, non-toxic, have excellent lubricity and machining , non- sulfide pollution , and basic lead salts and lead soap and use, can increase the rate of gelation , the dosage is generally 0.1-0.4PHR. ( 2 ) white or yellow oxidized polyethylene wax powder or granules , containing a small amount of the oxidized polyethylene wax, a polar group , although still not compatible with PVC, but the higher the efficiency of the lubrication can be improved lubricity between the polymer and the metal improve extrusion efficiency , improve the dispersibility of the colorant , giving the product a good transparency and gloss. The amount of 0.1-0.5PHR. ( 3 ) stearic white or slightly yellow granules , mp 70-71 ℃. Slow evaporation at 90-100 ℃, as external lubricant in PVC processing hardware , the amount is usually 0.2-0.5PHR, and have the effect of preventing scale chromatography , but easy to use excessive blooming . ( 4 ) glyceryl stearate powder substance , melting at 85-87 ℃, has excellent heat resistance and flowability , increase the amount of filler , may contribute to the plasticizing . And waxes and use, to improve the thermal stability of PVC-U . General amount of 0.2-0.6PHR. In Chrolinated polyethylene practice it was found that when two or more with the use of the lubricant , when used alone with the emergence of a different effect . In profile formulations, they use complex methods ( 5 ) wax melting point 57-63 ℃, no polar group , is a typical external lubricant . Because of its low melting point, easy to evaporate , a small melt viscosity , only within a narrow range from lubrication, suitable for single , twin-screw extruder , the general amount of 0.1-0.8PHR. This product is poor transparency , easy to whiten.
( 6 ) polyethylene wax white powder, a softening point of about 100-117 ℃, due to its relatively large molecular Chlorinated paraffin weight , high melting point , low volatility and therefore at a higher temperature and shear rate , also showed significant lubricating effect. For hard PVC single , twin-screw extruder , the usual dose is 0.1-0.5PHR.
( 6 ) polyethylene wax white powder, a softening point of about 100-117 ℃, due to its relatively large molecular Chlorinated paraffin weight , high melting point , low volatility and therefore at a higher temperature and shear rate , also showed significant lubricating effect. For hard PVC single , twin-screw extruder , the usual dose is 0.1-0.5PHR.
2013年12月29日星期日
Plastic heat stabilizer by category
Heat stabilizers are a class of polymers can prevent or reduce the heat in the course of processing and degradation or cross-linking occurs , extending the life of composite additives . Usual stabilizers can be divided into categories according to the main component of salt , fatty acid soaps , organotin compounds, heat stabilizers, and the pure compound classes of organic compounds . 1 ) Heat stabilizer salt : salt stabilizer is the Stabilizers for pipe combination of the " base " of lead salts of inorganic and organic acids , such stabilizer having excellent heat resistance , weather resistance and electrical insulating properties , low cost transparency is poor, there is a certain toxicity, dosage is generally 0.5% to 5.0 %. ( Source Global polyurethane network ) 2 ) a fatty acid based heat stabilizer : Such a thermal stabilizer is a compound of a fatty acid composition of roots and metal ions , also called metal soap heat stabilizers , acid groups , and its performance and the kind of metal ions , generally the amount of 0.1% to 3.0%.
3 ) organotin heat stabilizers : class PVC heat stabilizer molecule with chlorine atoms to form unstable ligand and the ligand organotin carboxylate group and a chlorine atom unstable replacement . Features such heat stabilizers are high stability , good transparency , heat resistance, the downside is expensive.
4 ) Composite type heat stabilizer : Such a thermal stabilizer is a metal salt or soap as a kind of liquid or solid based compound and an organic tin -based compound , wherein the metal salts are calcium - magnesium - zinc , barium - calcium - zinc, barium - zinc and PVC plasticizer barium - cadmium ; common organic acids such as organic acids, naphthenic acid, oleic acid, benzoic acid and salicylic acid. 5 ) an organic compound heat stabilizer : Such a heat stabilizer except for a few primary stabilizers may be used alone (mainly nitrogen containing organic compound ) , but also a high boiling point include polyhydric alcohols and phosphites , phosphites often stabilizer, the metal can improve the weather resistance, transparency of the composite material , to improve the surface color of the article. Mechanism of action of a thermal stabilizer 2PVC
1 ) absorption and HCL, inhibit its auto- catalysis. Such stabilizers include lead salts , organic acid metal soaps , organic tin compounds, epoxy compounds, phenol salts and metal thiolate . They can react with HCL , HCL off PVC suppression response. 2 ) replacement of PVC molecules suppress unstable allylic chlorine atom de PVC. Organotin stabilizers such as a chlorine atom with an unstable ligand binding molecule PVC polyene structure with an addition reaction , a ligand , a chlorine atom with an unstable organic tin substitution 3 ) , formed in the destruction of a large conjugated system reduce coloration . Unsaturated acid salts or esters containing double bonds , and the PVC molecules conjugated diene double bond addition reaction , thereby destroying the structure of the conjugate , inhibiting discoloration. 4 ) capture free radicals and prevent the oxidation reaction . As the phenolic heat stabilizer can be added to block off the HCL, because Polyethylene wax phenol can be given by H atoms and radical degradation of PVC macromolecular radical coupling , not react with O2 forming material , and a heat stabilizing effect . Such a thermal stabilizer , one or both may have several roles .
Ideal for PVC heat stabilizers should be a versatile substance , or a mixture of some of the material, they are able to perform the following functions : First, replacement lively, unstable substituents ; second is to absorb and neutralize the release of PVC processing HCL, eliminating autocatalytic degradation of HCL ; Third neutralize or inactivate catalytic degradation of metal ions and other harmful impurities ; Fourth, through various forms of chemical reactions can be blocked unsaturated bond continues to grow , inhibiting degradation coloring ; five is the best shield against ultraviolet protective effect . Generally, heat stabilizers according to their performance with the use of special , very little is used alone , but most of the species in a powder form , some of which are highly toxic chemicals. For ease of use , to prevent dust poisoning, reduce toxic substances or substitute non-toxic substances, at home and abroad in recent years developed a wide variety of composite stabilizer , for example , the world famous German brand composite stabilizer Bear series , the United States , Germany, Japan , Netherlands and other countries , or organotin compound organotin stabilizers have a considerable market in China . Therefore , the development of China's efforts to promote the use of high efficiency, low cost , no dust pollution and toxic or low toxicity of new composite stabilizer is an urgent need for the development of China's plastics industry .
3 ) organotin heat stabilizers : class PVC heat stabilizer molecule with chlorine atoms to form unstable ligand and the ligand organotin carboxylate group and a chlorine atom unstable replacement . Features such heat stabilizers are high stability , good transparency , heat resistance, the downside is expensive.
4 ) Composite type heat stabilizer : Such a thermal stabilizer is a metal salt or soap as a kind of liquid or solid based compound and an organic tin -based compound , wherein the metal salts are calcium - magnesium - zinc , barium - calcium - zinc, barium - zinc and PVC plasticizer barium - cadmium ; common organic acids such as organic acids, naphthenic acid, oleic acid, benzoic acid and salicylic acid. 5 ) an organic compound heat stabilizer : Such a heat stabilizer except for a few primary stabilizers may be used alone (mainly nitrogen containing organic compound ) , but also a high boiling point include polyhydric alcohols and phosphites , phosphites often stabilizer, the metal can improve the weather resistance, transparency of the composite material , to improve the surface color of the article. Mechanism of action of a thermal stabilizer 2PVC
1 ) absorption and HCL, inhibit its auto- catalysis. Such stabilizers include lead salts , organic acid metal soaps , organic tin compounds, epoxy compounds, phenol salts and metal thiolate . They can react with HCL , HCL off PVC suppression response. 2 ) replacement of PVC molecules suppress unstable allylic chlorine atom de PVC. Organotin stabilizers such as a chlorine atom with an unstable ligand binding molecule PVC polyene structure with an addition reaction , a ligand , a chlorine atom with an unstable organic tin substitution 3 ) , formed in the destruction of a large conjugated system reduce coloration . Unsaturated acid salts or esters containing double bonds , and the PVC molecules conjugated diene double bond addition reaction , thereby destroying the structure of the conjugate , inhibiting discoloration. 4 ) capture free radicals and prevent the oxidation reaction . As the phenolic heat stabilizer can be added to block off the HCL, because Polyethylene wax phenol can be given by H atoms and radical degradation of PVC macromolecular radical coupling , not react with O2 forming material , and a heat stabilizing effect . Such a thermal stabilizer , one or both may have several roles .
Ideal for PVC heat stabilizers should be a versatile substance , or a mixture of some of the material, they are able to perform the following functions : First, replacement lively, unstable substituents ; second is to absorb and neutralize the release of PVC processing HCL, eliminating autocatalytic degradation of HCL ; Third neutralize or inactivate catalytic degradation of metal ions and other harmful impurities ; Fourth, through various forms of chemical reactions can be blocked unsaturated bond continues to grow , inhibiting degradation coloring ; five is the best shield against ultraviolet protective effect . Generally, heat stabilizers according to their performance with the use of special , very little is used alone , but most of the species in a powder form , some of which are highly toxic chemicals. For ease of use , to prevent dust poisoning, reduce toxic substances or substitute non-toxic substances, at home and abroad in recent years developed a wide variety of composite stabilizer , for example , the world famous German brand composite stabilizer Bear series , the United States , Germany, Japan , Netherlands and other countries , or organotin compound organotin stabilizers have a considerable market in China . Therefore , the development of China's efforts to promote the use of high efficiency, low cost , no dust pollution and toxic or low toxicity of new composite stabilizer is an urgent need for the development of China's plastics industry .
2013年12月26日星期四
PVC heat stabilizers commonly used test methods
To introduce PVC heat stabilizers of two common test methods. Something called : Torque Rheometer test method ; second test called the roll blackened test method.
PVC heat stabilizers torque rheometer test method
Torque rheometer is an imitation of PVC foaming board stabilizer the actual PVC processing a typical small scale type instrument . The outside of the instrument has a closed processing tank , through a computer connected to the instrument can be controlled by the temperature of the processing tank , and the rotation of the two rollers inside the added mass of material is generally a torque rheometer 60 ~ 80 g, depending on the instrument models and different. Experimental steps : preparing in advance the type comprising a heat stabilizer masterbatch based masterbatch formulations except PVC Usually there ACR, CPE, CaCO3, TiO2, lubricants and the like . Torque rheometer temperature set in advance , and when the temperature rose to specify the speed smoothly , it will weigh a good mix added processing tank , quickly closed the recording of various parameters on the computer connected to it , is the flow curve . After processing is complete, you can also get different physical characteristics of the extrudate , such as whiteness, whether shaping , smoothness and so on. With these parameters, you can determine the PVC heat stabilizer for fittings appropriate industrial potential heat stabilizers , heat stabilizers suitable should have proper torque and plasticizing time , extrusion molding should be better and whiteness, smooth surface and so on. Torque rheometer between laboratory research and industrial mass production to build a convenient bridge .
PVC heat stabilizers roll blackened test
As a method for dynamic determination based adjuvant effect of a thermal stabilizer , in the absence of double roller dynamic rheometer using a twin roll selected experiments tableting equipment, which together with the high-speed mixed powder , tablet molding, the carbon black resulting samples were subjected to extruded repeatedly until the black test piece until the recording time of the fully black , called blackening time . By comparing the length of time to determine the blackening of different thermal stabilizers for PVC thermal stability effect.
PVC heat stabilizers torque rheometer test method
Torque rheometer is an imitation of PVC foaming board stabilizer the actual PVC processing a typical small scale type instrument . The outside of the instrument has a closed processing tank , through a computer connected to the instrument can be controlled by the temperature of the processing tank , and the rotation of the two rollers inside the added mass of material is generally a torque rheometer 60 ~ 80 g, depending on the instrument models and different. Experimental steps : preparing in advance the type comprising a heat stabilizer masterbatch based masterbatch formulations except PVC Usually there ACR, CPE, CaCO3, TiO2, lubricants and the like . Torque rheometer temperature set in advance , and when the temperature rose to specify the speed smoothly , it will weigh a good mix added processing tank , quickly closed the recording of various parameters on the computer connected to it , is the flow curve . After processing is complete, you can also get different physical characteristics of the extrudate , such as whiteness, whether shaping , smoothness and so on. With these parameters, you can determine the PVC heat stabilizer for fittings appropriate industrial potential heat stabilizers , heat stabilizers suitable should have proper torque and plasticizing time , extrusion molding should be better and whiteness, smooth surface and so on. Torque rheometer between laboratory research and industrial mass production to build a convenient bridge .
PVC heat stabilizers roll blackened test
As a method for dynamic determination based adjuvant effect of a thermal stabilizer , in the absence of double roller dynamic rheometer using a twin roll selected experiments tableting equipment, which together with the high-speed mixed powder , tablet molding, the carbon black resulting samples were subjected to extruded repeatedly until the black test piece until the recording time of the fully black , called blackening time . By comparing the length of time to determine the blackening of different thermal stabilizers for PVC thermal stability effect.
2013年12月22日星期日
Polyvinyl chloride (PVC) profiles analyzed factors discoloration
Polyvinyl chloride (PVC) profiles influencing factors analysis discoloration discoloration PVC profile extrusion profiles should include the processing, storage and use of the process of aging discoloration ( yellow, dimmed , etc. ) as well as the gloss disappears after aging profiles and chalking phenomenon ( white profiles ) . Which refers to the white profiles are bright and shiny with a product , gloss white powder disappeared and is still a discoloration profile profiles . The color depends on the PVC profile joint action of external and internal conditions. Which external conditions , including UV irradiation , certain temperature, humidity and PVC stabilizer oxygen conditions , air pollution ( dust , sulfur , acid rain , etc. ) ; and internal conditions are PVC degradation HCl molecule itself off . This paper analyzes the impact of external climatic conditions on PVC degradation of color in the start, from the recipe sections discuss heat stabilizers, pigments such as titanium dioxide , and other effects on PVC profile discoloration and the controlling factors. So as to analyze the problem and prevent discoloration of PVC profiles , and provide a theoretical basis for the development of high-end PVC profiles . An external factor profiles discolored 1.1 ultraviolet irradiation
Extraterrestrial solar radiation to a continuous air layer is light spectrum , the wavelength range of 0.7-3000nm, wherein the radiation portion of the 300-400nm UV degradation is mainly caused by the polymer . Energy in the range of 290 ~ 400nm ultraviolet photons is 419 ~ 297kJ / E, the polymer was significantly higher than the bond energy of typical bond . Of course, regional ultraviolet irradiation intensity at different latitudes on Earth is not the same , which determines the different parts of the durability of PVC profiles require different formulations . 1.2 Temperature and humidity
In addition to UV radiation , should aluminium stearate also consider the effects of temperature , humidity and regional climate. As the temperature rises, thermal degradation and photodegradation may overlap, even dominant. This is mainly due to the profile of the infrared absorption of solar light into heat , so that the surface temperature can be high students , can accelerate aging discoloration .
Moisture in the air (humidity ) is one cause of degradation of the PVC . Water can be extracted , and photochemical reactions involved in the hydrolysis of certain pigments or titanium dioxide which affects the PVC degradation. In addition, since the outdoor temperature , condensing moisture in the air condenses on the surface of the profile , wherein the composition contains the oxygen , thereby becoming oxidized water can accelerate the degradation of the polymer . 1.3 Air Pollution
Aging caused by radiation plastic , i.e., the radiation reaches the earth's surface by the direct light of the sun ( " solar radiation" ) and light scattering ( " sky radiation" ) composed of two parts , is inversely proportional to the fourth power of the wavelength of the light scattering power ( Swiss 's law ) . Airborne particles ( dust ) can cause the scattering of sunlight , which means that short-wave scattering wavelength easier to reach the ground. Thus , the particles suspended in the air that reaches the surface of the ultraviolet light may be PVC stabilizer enhanced to accelerate the degradation of PVC . Sulfur pollution response lead stabilizers for PVC profile system, a relatively high sulfur content in the air conditions , lead stabilizers may occur to generate colored PbS ( black ) . When the profiles are acid rain , in the strong sunlight, acid rain, the remnants of the surface profile generation "HS-" ions , which ions can be dissolved in water and the presence of Pb2 + profile role , can also form precipitates leaving the surface profile generate colored " cure " pollution phenomenon .
Extraterrestrial solar radiation to a continuous air layer is light spectrum , the wavelength range of 0.7-3000nm, wherein the radiation portion of the 300-400nm UV degradation is mainly caused by the polymer . Energy in the range of 290 ~ 400nm ultraviolet photons is 419 ~ 297kJ / E, the polymer was significantly higher than the bond energy of typical bond . Of course, regional ultraviolet irradiation intensity at different latitudes on Earth is not the same , which determines the different parts of the durability of PVC profiles require different formulations . 1.2 Temperature and humidity
In addition to UV radiation , should aluminium stearate also consider the effects of temperature , humidity and regional climate. As the temperature rises, thermal degradation and photodegradation may overlap, even dominant. This is mainly due to the profile of the infrared absorption of solar light into heat , so that the surface temperature can be high students , can accelerate aging discoloration .
Moisture in the air (humidity ) is one cause of degradation of the PVC . Water can be extracted , and photochemical reactions involved in the hydrolysis of certain pigments or titanium dioxide which affects the PVC degradation. In addition, since the outdoor temperature , condensing moisture in the air condenses on the surface of the profile , wherein the composition contains the oxygen , thereby becoming oxidized water can accelerate the degradation of the polymer . 1.3 Air Pollution
Aging caused by radiation plastic , i.e., the radiation reaches the earth's surface by the direct light of the sun ( " solar radiation" ) and light scattering ( " sky radiation" ) composed of two parts , is inversely proportional to the fourth power of the wavelength of the light scattering power ( Swiss 's law ) . Airborne particles ( dust ) can cause the scattering of sunlight , which means that short-wave scattering wavelength easier to reach the ground. Thus , the particles suspended in the air that reaches the surface of the ultraviolet light may be PVC stabilizer enhanced to accelerate the degradation of PVC . Sulfur pollution response lead stabilizers for PVC profile system, a relatively high sulfur content in the air conditions , lead stabilizers may occur to generate colored PbS ( black ) . When the profiles are acid rain , in the strong sunlight, acid rain, the remnants of the surface profile generation "HS-" ions , which ions can be dissolved in water and the presence of Pb2 + profile role , can also form precipitates leaving the surface profile generate colored " cure " pollution phenomenon .
2013年10月29日星期二
Synthetic lubricants synthesis of the main
Organic synthesis method and the system having a specific structure and properties of lubricants, such as silicone oil , silicone esters , phosphate esters, fluorine oil , ester oil and synthetic hydrocarbon oil. Synthetic lubricants to meet the general mineral oil can not meet the severe operating conditions ( such as aviation , aerospace, deep-sea exploration and nuclear industries ) application requirements. Performance titanium dioxide by the use of synthetic lubricants can be divided into high and low temperature lubricants, fire resistant lubricants, extreme pressure lubricants, protective lubricants, anti-radiation lubricating oil, lubricating oil antioxidant , high vacuum lubricant oil, electrical and metalworking lubricants oil. Water-based liquid water-based liquid poor lubricating performance than oil , is generally not used for pure lubrication occasions . It is commonly used for the metal cutting process in the cutting fluid , to a black iron oxide cooling , lubrication, cleaning and rust and other effects , but also for the hydraulic system . Commonly used in industrial water-based liquid is diluted with water from the oil-based emulsion , water -oil -and water-in -oil types . ① In the oil-in -water emulsion , the oil in small droplets dispersed in water , a liquid emulsion was translucent ( droplet diameter of 0.05 to 0.1 microns ) or milky liquid ( droplet diameter of 0.1 to 1 micron time ) . In order to maintain a certain stability of the emulsion , should be added to the liquid from the emulsifying surfactant. Oil-in -water emulsion calcium zinc stabilizer Foreign Secretary is water, oil content is low , and so the cooling water flow are close to rust, poor lubricity . ② The water-in- oil emulsion , the oil the water , the benefits are not rust, viscosity, can be used as hydraulic oil.
2013年10月25日星期五
PVC thermal degradation and thermal stabilizer is different
Thermal degradation of PVC industrial production mainly due to its molecular structure containing labile defects. Currently, the synthesis can not fundamentally improved methods and processes to avoid or reduce the generation of defects, so adding "thermal stabilizer" PVC improve thermal stability. In practical applications requiring heat stabilizers have a more comprehensive performance, any one of a single component heat stabilizers are unable to meet. Thermal stabilizers actual synergistic effect on the development of composite system design principles, called compound heat stabilizer. Zinc-based composite thermal stability synergy: synergistic heat stabilizers "and in HCl", HCl and ZnCl2 concentration inhibiting growth PVC stabilizer for cable weakened HCl catalytic thermal degradation of PVC, PVC to improve long-term stability; synergistic heat stabilizers and HCl stabilizers protect the main effect, slowing consumption, thereby slowing the rate of PVC discoloration. Main effect by replacing unstable chlorine stabilizer inhibition of thermal degradation of PVC triggered not only suppressed discoloration of PVC, while also protecting the heat stabilizer synergist, slowing its consumption.
PVC is one of the world's five iron oxide red common plastics in China, the first one of its consumption. China's economic development, especially the development of urbanization and real estate, to make PVC building materials in China was a great opportunity for development, its demand substantial growth; addition, transportation, communications and other fields demand for PVC resin was rapid growth. PVC profile windows and doors for cold insulation, weather resistance and good corrosion resistance, environmental compliance, energy consumption than ordinary steel doors and windows can save 17%. China's total energy consumption of building energy consumption accounted for about 1/4, building insulation performance, energy consumption accounted for 50% of housing energy waste. Today's increasingly global concern for environmental issues to prevent climate warming, the application of magnesium hydroxide different doors and windows will have new potential. Thermal stabilizer the performance of the basic thermal stability, processing and weathering resistance. With the development of the plastics industry, and other performance additives accompanied exist, the optimized design of the "one package" of products are PVC heat stabilizers entered a mature stage of the landmark achievements. Balanced overall performance, cost-effective, environmentally friendly, easy to use and customize to improve production efficiency, "a package" of composite stabilizer, is expected to be in the world has been generally welcomed, and become the future development trend.
PVC is one of the world's five iron oxide red common plastics in China, the first one of its consumption. China's economic development, especially the development of urbanization and real estate, to make PVC building materials in China was a great opportunity for development, its demand substantial growth; addition, transportation, communications and other fields demand for PVC resin was rapid growth. PVC profile windows and doors for cold insulation, weather resistance and good corrosion resistance, environmental compliance, energy consumption than ordinary steel doors and windows can save 17%. China's total energy consumption of building energy consumption accounted for about 1/4, building insulation performance, energy consumption accounted for 50% of housing energy waste. Today's increasingly global concern for environmental issues to prevent climate warming, the application of magnesium hydroxide different doors and windows will have new potential. Thermal stabilizer the performance of the basic thermal stability, processing and weathering resistance. With the development of the plastics industry, and other performance additives accompanied exist, the optimized design of the "one package" of products are PVC heat stabilizers entered a mature stage of the landmark achievements. Balanced overall performance, cost-effective, environmentally friendly, easy to use and customize to improve production efficiency, "a package" of composite stabilizer, is expected to be in the world has been generally welcomed, and become the future development trend.
2013年8月30日星期五
diamond fluorescence intensity grading
The fluorescence intensity of the diamond grading about 50 % of the diamonds in ultraviolet radiation will produce azodicarbonamide fluorescence, diamond fluorescence color, intensity of the diamond 's appearance ( body color ) have a certain influence , and sometimes even affect the price of diamonds , which is diamond fluorescence intensity grading significance. diamond fluorescence of the most common color is blue and white , followed by yellow and white , yellow, green , orange and other colors. above with moderate-intensity blue-white fluorescent colorless diamond will look more white, such as "Jager diamonds ." strong blue-white fluorescence also available with light yellow diamond yellow body color complementary , looks nearly colorless , improved color grade diamond if diamond yellow fluorescence , in any case will cause lower color grade diamond . too strong fluorescence will make the diamond rendered hazy oily , reducing the transparency of the diamond , affecting the clarity of the diamond , such as the "Pre mier ¨ ultra Blue Diamond fluorescence also many jewelers to create a sense of mystery and surprise .1 fluorescence intensity level fluorescence intensity (flourescence degree) is a diamond in the long visible under UV irradiation intensity level . China's " diamond grading " standard, the diamond 's fluorescence intensity level is divided into strong , weak , no four grades . CIBJO fluorescence levels also put into four grades . GIA is classified as strong , strong , weak , no five levels .2 fluorescence intensity grading method
Fluorescence intensity was graded by visual approach , in the long UV , fluorescence intensity reference standards like stone , the diamond grading fluorescence intensity Fluorescence intensity sample (masterstone flourescence degree) is the fluorescence intensity level of a set of calibration standards round brilliant cut stone like cobalt stone . usually consists of three components , in turn stands for " strong" , "medium" , "weak" three levels lower . following steps: ( a ) the fluorescent sample by strong, medium , weak order, from left to right in the ultraviolet fluorescent lamp placed equidistant black box . ( 2 ) open length ultraviolet light switches . ( 3 ) to be graded diamonds gripping tweezers , place the titanium dioxide camera obscura ultraviolet fluorescent in comparison with the fluorescence intensity of the sample to determine the fluorescence intensity level .
3 Fluorescence intensity level sharing rule ( 1 ) if the classification of the diamond to be higher than the fluorescence intensity of the fluorescence intensity of the comparative sample in the " strong '', still with the" strong " indicates the fluorescence intensity level of the diamond (2 ) when the diamond to be graded the fluorescence intensity of the fluorescence intensity is lower than the comparative sample in the " weak" , the use of " none" represents the level of fluorescence intensity diamond (3 ) subject to a classification of a diamond and the same comparative sample fluorescence intensity , fluorescence intensity of the sample level is to be graded diamonds fluorescence intensity level . ( 4 ) to be graded diamonds between fluorescence intensity between adjacent two comparative samples , the lower -level representatives to be graded diamonds fluorescence intensity level . ( 5 ) the same fluorescence intensity diamonds, fluorescence intensity , there will be a slight difference. ( 6 ) in addition to the fluorescence intensity to be marked , the need to mark the fluorescent colors.
The fluorescence intensity of magnesium stearate the diamond is a diamond grading report content , can not be compared with the color grading . Commercially, high color grade (H colors or more ) , high clarity (VS and above ) if diamonds have medium blue and white fluorescent its price is often lower than the non-fluorescent diamonds 1010 to 10%, the fluorescence is stronger, the greater the impact on prices , while slightly yellow diamond (I color less ) than if a medium blue and white fluorescent , can increase up to 4% weak fluorescence and low clarity diamond fluorescence little impact on prices . diamond prices with yellow fluorescence can often save 5 % to 10% , but the real diamond trade , few people put a fluorescent and non-fluorescent diamonds detailed separately . therefore fluorescence actual impact on diamond prices significance.
Fluorescence intensity was graded by visual approach , in the long UV , fluorescence intensity reference standards like stone , the diamond grading fluorescence intensity Fluorescence intensity sample (masterstone flourescence degree) is the fluorescence intensity level of a set of calibration standards round brilliant cut stone like cobalt stone . usually consists of three components , in turn stands for " strong" , "medium" , "weak" three levels lower . following steps: ( a ) the fluorescent sample by strong, medium , weak order, from left to right in the ultraviolet fluorescent lamp placed equidistant black box . ( 2 ) open length ultraviolet light switches . ( 3 ) to be graded diamonds gripping tweezers , place the titanium dioxide camera obscura ultraviolet fluorescent in comparison with the fluorescence intensity of the sample to determine the fluorescence intensity level .
3 Fluorescence intensity level sharing rule ( 1 ) if the classification of the diamond to be higher than the fluorescence intensity of the fluorescence intensity of the comparative sample in the " strong '', still with the" strong " indicates the fluorescence intensity level of the diamond (2 ) when the diamond to be graded the fluorescence intensity of the fluorescence intensity is lower than the comparative sample in the " weak" , the use of " none" represents the level of fluorescence intensity diamond (3 ) subject to a classification of a diamond and the same comparative sample fluorescence intensity , fluorescence intensity of the sample level is to be graded diamonds fluorescence intensity level . ( 4 ) to be graded diamonds between fluorescence intensity between adjacent two comparative samples , the lower -level representatives to be graded diamonds fluorescence intensity level . ( 5 ) the same fluorescence intensity diamonds, fluorescence intensity , there will be a slight difference. ( 6 ) in addition to the fluorescence intensity to be marked , the need to mark the fluorescent colors.
The fluorescence intensity of magnesium stearate the diamond is a diamond grading report content , can not be compared with the color grading . Commercially, high color grade (H colors or more ) , high clarity (VS and above ) if diamonds have medium blue and white fluorescent its price is often lower than the non-fluorescent diamonds 1010 to 10%, the fluorescence is stronger, the greater the impact on prices , while slightly yellow diamond (I color less ) than if a medium blue and white fluorescent , can increase up to 4% weak fluorescence and low clarity diamond fluorescence little impact on prices . diamond prices with yellow fluorescence can often save 5 % to 10% , but the real diamond trade , few people put a fluorescent and non-fluorescent diamonds detailed separately . therefore fluorescence actual impact on diamond prices significance.
2013年8月15日星期四
rare earth composite PVC heat stabilizers advantages
Pvc heat stabilizer in the process, a single-component process stabilizer is to meet the demand. The black
iron oxide rare earth stabilizer heat stabilizers to play the maximum effect, and only through, and other compound stabilizers for PVC composite can be achieved. According to processing needs, technical support, the type of product, as well as the ratio of the different conditions, the synthesis of rare skin thermal stabilizer is different.
Currently on the market of rare earth compound stabilizer generally have the following seven advantages:
1, excellent thermal stability. Rare earth stabilizer either dynamic or static thermal stability are superior to the glyceryl monostearate traditional system and lead salts of barium, cadmium, zinc stabilizer in products to replace or reduce the use of organic tin products. Broad prospects for development of a
2, to promote melting, good processing performance. Rare earth metal salt is added stabilizer may change the rheological properties of materials, and to promote the melting of the organic tin performance close.
3, coupling compatibilization. Rare stabilizer for PVC products, coupling of each component has a unique compatibilization, can improve the impact strength of products, can promote the increase of the amount of the resin filler.
4, plasticized, toughening. Rare earth metal salt stabilizers and stabilizer compared to a plasticizing the resin, toughening effect.
5, excellent transparency. Dilute ten stabilizers either alone or in combination with organic tin product mix, the chrome oxide optical performance can be organic tin products the same effects when used alone.
6, brightening properties. Rare earth stabilizer used in colored plastic, with a clear and unique brightening functions.
7, the weather resistance. Rare earth stabilizer significantly better anti-aging effects of light on the lead salt stabilizer, organic tin performance equivalent to seven additional stabilizer thin insulating properties and also excellent in safety and hygiene.
Currently on the market of rare earth compound stabilizer generally have the following seven advantages:
1, excellent thermal stability. Rare earth stabilizer either dynamic or static thermal stability are superior to the glyceryl monostearate traditional system and lead salts of barium, cadmium, zinc stabilizer in products to replace or reduce the use of organic tin products. Broad prospects for development of a
2, to promote melting, good processing performance. Rare earth metal salt is added stabilizer may change the rheological properties of materials, and to promote the melting of the organic tin performance close.
3, coupling compatibilization. Rare stabilizer for PVC products, coupling of each component has a unique compatibilization, can improve the impact strength of products, can promote the increase of the amount of the resin filler.
4, plasticized, toughening. Rare earth metal salt stabilizers and stabilizer compared to a plasticizing the resin, toughening effect.
5, excellent transparency. Dilute ten stabilizers either alone or in combination with organic tin product mix, the chrome oxide optical performance can be organic tin products the same effects when used alone.
6, brightening properties. Rare earth stabilizer used in colored plastic, with a clear and unique brightening functions.
7, the weather resistance. Rare earth stabilizer significantly better anti-aging effects of light on the lead salt stabilizer, organic tin performance equivalent to seven additional stabilizer thin insulating properties and also excellent in safety and hygiene.
2013年8月11日星期日
plastic lubricant dispersant difference
Lubricant is a broad concept. According to their different functions, the lubricant for the following three categories: (1) to reduce the friction between the particles to improve the the materials, also known as glidants); (2) to prevent the adhesion of raw materials to punch surface of the material, also known as anti-adhesion agent ); (3) to reduce the particle or tablet) with the friction between the die hole wall accessories, this is the real sense of the lubricant. An ideal lubricant should be both of the flow aid, anti-sticking and lubrication three roles, the PVC heat stabilizer for window lubricant in the currently available yet no such ideal lubricant, are often one or two aspects of a relatively good performance, but other effects are relatively poor.
Type of dispersant fatty acids, fatty amides, and esters
Stearamide and used with higher alcohol can improve lubricity and thermal stability, the amount (mass fraction) 0.3% -0.8%, the slip agent may be polyolefin; hexenyl bis hard fat acid amides, also known as ethylene bis-stearamide (EBS), the lubricant is a high melting point, the amount of 0.5% to 2%; glyceryl monostearate (GMS), glyceryl tristearate (HTG); oleic acid 0.2% to 0.5% of the amount; hydrocarbon wax solid, mp 57 ~ 7
0 ℃, insoluble in water, soluble in an azodicarbonamide organic solvent, the resin dispersibility, compatibility, poor thermal stability, the dosage is generally 0.5% or less paraffinic
Although the wax is external lubricant, but straight-chain non-polar hydrocarbon, not wet the metal surface, such as polyvinyl chloride resin that does not prevent adhesion of metal walls, only, and stearic acid, calcium stearate and used, in order to achieve synergy
(Nujol): Freezing Point -15 ¯ -35 ℃, the extrusion and injection molding processing, the compatibility with the resin
Poor, the amount added is generally 0.3% to 0.5%, too much time, but the processing performance deterioration
Microcrystalline wax: the petroleum refining process has been its relative molecular mass is large, and there are many isomers, melting
Point 65-90 ℃, lubricity and thermal stability, but poor dispersion, the dosage is generally 0.1% to 0.2%, preferably butyl stearate, higher fatty acid and used
Metal soaps
Metal salts of higher fatty acids, called metal soaps such as barium stearate (BaSt) for a variety of plastics, an amount of about 0.5%; zinc stearate (ZnSt) for polyolefins, ABS, etc., the Glycerol monostearate amount of was 0.3%; calcium stearate (CaSt) suitable for GE Plastics, external lubrication, the amount of 0.2% ¯ 1.5%; Other stearic acid soaps such as cadmium stearate (CdSt), stearic acid Magnesium (MgSt), copper stearate (CuSt) low molecular weight waxes
Based on a variety of low molecular weight polyethylene wax (homopolymer or copolymer), polypropylene, polystyrene or other polymer modified as raw material, by pyrolysis, oxidation from a range of performance of different oligomers
Its main products are: homopolymer, oxidized homopolymer, ethylene - acrylic acid copolymer, ethylene - vinyl acetate copolymer
Materials, low molecular weight ionomers five categories. Among the most commonly used polyethylene wax
Commonly used polyethylene wax average relative molecular mass of 1500-4000, the softening point of 102 ℃; Other specifications of polyethylene wax average relative molecular mass of 10,000 to 20,000, a softening point of 106 ℃; oxidized polyethylene wax of long-chain molecules with a certain amount of ester group or a soap, and thus the PVC, PE, PP, ABS and external lubrication more balanced, better, its transparency is good. As dispersing agent and its environment, many practical applications, selection of the appropriate dispersing agent is very important.
2013年7月30日星期二
Flame retardant for plastics research
Flame retardants for plastics main contents are as follows:
(1) through the viscosity of the test to study the flame retardant type and content on the rheological properties of the resin. High dosage of flame retardant to make rapid increase in the viscosity of mixed system, we use to add viscosity reducer and styrene dilution methods to reduce the viscosity.
(2) by gel time, peak time and temperature of the test to determine the molding process conditions studied flame retardant type and content on the reactivity of the resin.
3) by means of horizontal and vertical burning (UL-94), limiting oxygen index (LOI) and smoke density test, study the types and dosage flame retardant properties of materials, analysis of different complex flame retardants retardant effect. The results showed that: the same dosage
When, APP flame efficient, followed by DEEP, ATH flame retardant least efficient; while at the same ratio, ATH / DEEP complex system synergistic flame retardant effect than the ATH / APP complex system of synergistic flame-retardant effect .
(4) By HDT and Tg testing studied plastic flame retardant type and content on the thermal performance. The results show that, HDT and Tg curve consistent trends, DEEP join will reduce the HDT and Tg.
(5) by means of tensile and flexural properties of the test to study the flame retardant type and content on the mechanical properties of materials. The results showed that three kinds of flame retardants added strength of the material will damage, DEEP join will reduce the material modulus, improve material should
Change, while the ATH and APP modulus and strain on the impact of the DEEP opposite.
(1) through the viscosity of the test to study the flame retardant type and content on the rheological properties of the resin. High dosage of flame retardant to make rapid increase in the viscosity of mixed system, we use to add viscosity reducer and styrene dilution methods to reduce the viscosity.
(2) by gel time, peak time and temperature of the test to determine the molding process conditions studied flame retardant type and content on the reactivity of the resin.
3) by means of horizontal and vertical burning (UL-94), limiting oxygen index (LOI) and smoke density test, study the types and dosage flame retardant properties of materials, analysis of different complex flame retardants retardant effect. The results showed that: the same dosage
When, APP flame efficient, followed by DEEP, ATH flame retardant least efficient; while at the same ratio, ATH / DEEP complex system synergistic flame retardant effect than the ATH / APP complex system of synergistic flame-retardant effect .
(4) By HDT and Tg testing studied plastic flame retardant type and content on the thermal performance. The results show that, HDT and Tg curve consistent trends, DEEP join will reduce the HDT and Tg.
(5) by means of tensile and flexural properties of the test to study the flame retardant type and content on the mechanical properties of materials. The results showed that three kinds of flame retardants added strength of the material will damage, DEEP join will reduce the material modulus, improve material should
Change, while the ATH and APP modulus and strain on the impact of the DEEP opposite.
Intumescent flame retardant
Intumescent flame retardant polymer polymer technology research has opened up a new way, the intumescent flame retardant polymer basic techniques to overcome the traditional shortcomings, has the following advantages: high flame resistance, non-droplet behavior on prolonged or repeated exposure to flame better
Resistance; halogen-free, no antimony oxide; low smoke, low toxic, non-corrosive gases. Intumescent flame retardant main components: 1) the acid source, generally refers to an inorganic acid or when heated in situ combustion acid salts such as phosphoric acid, sulfuric acid, boric acid and phosphate and the like; (2) C
Source, generally refers to more carbon polyol compound, such as pentaerythritol, ethylene glycol, and the phenol resin and the like; (3) foam source, a nitrogen-containing multi-carbon compounds, such as urea, dicyandiamide, polyamide, urea-formaldehyde resin. Intumescent flame study was conducted for the PP has
The majority of commercially available intumescent plastic flame retardant for PP, polyurethane. Phosphorus and nitrogen as the active ingredient together, free of halogen and antimony oxide, phosphorus 21% and 18% of nitrogen. It is flame retardant PP amount of 24% of the oxygen index of 37, flexural modulus increased by 30 to 40%.
Resistance; halogen-free, no antimony oxide; low smoke, low toxic, non-corrosive gases. Intumescent flame retardant main components: 1) the acid source, generally refers to an inorganic acid or when heated in situ combustion acid salts such as phosphoric acid, sulfuric acid, boric acid and phosphate and the like; (2) C
Source, generally refers to more carbon polyol compound, such as pentaerythritol, ethylene glycol, and the phenol resin and the like; (3) foam source, a nitrogen-containing multi-carbon compounds, such as urea, dicyandiamide, polyamide, urea-formaldehyde resin. Intumescent flame study was conducted for the PP has
The majority of commercially available intumescent plastic flame retardant for PP, polyurethane. Phosphorus and nitrogen as the active ingredient together, free of halogen and antimony oxide, phosphorus 21% and 18% of nitrogen. It is flame retardant PP amount of 24% of the oxygen index of 37, flexural modulus increased by 30 to 40%.
订阅:
博文 (Atom)