PVC plasticizer

PVC plasticizer
显示标签为“iron oxide yellow”的博文。显示所有博文
显示标签为“iron oxide yellow”的博文。显示所有博文

2013年12月9日星期一

PVC external lubricants in providing high-quality PVC products for human

We all know that since industrialization in a long period of time . Most of the use of plastic materials is based on the production of soft PVC products ( such as soft leather, toys, etc. ) based, and the production of soft products rarely require an auxiliary lubricant . Therefore, the titanium dioxide anatase  use of the variety and quantity of lubricant inside and outside are very limited. With the continuous development of industrial technology in a variety of raw materials for PVC hard products ( such as tubes, sheets, plates , profiles , etc. ) have been developed rapidly , and these different hardware products due to different processing equipment and technology needs , whether it is for the PVC lubricant from the variety and quantity requirements are made ​​more so , this demand will continue to promote the development and production of the lubricant products. After you add the right amount of lubricant in PVC , can reduce the friction between macromolecules between PVC and PVC particles melt before the melt ; reduce friction between the melt and PVC plastic mechanical contact between surfaces . PVC amount of lubricant can improve melt flow , increase productivity , and to prevent friction and heat caused by the degradation of PVC , PVC products to improve the appearance quality .
 With the expansion of the application of PVC products , green ideas for everyone continue to enhance the health of plastics additives , transparency , processability and put forward  Zinc stearate strict requirements, which thus contributing to the development and application of the new PVC lubricants . In recent years , PVC lubricants developed rapidly, the proportion of consumption is also on the rise.
PVC external lubricants to provide mankind with high quality PVC products indispensable role . But its product structure adjustment constantly changing , new technology development at a faster rate , an endless stream of new varieties , more sophisticated means of detection , evaluation method is more reasonable. If you do not pay attention  Optical brightener to the production of lubricants to the green direction, then the lubricant ring true when bound to be eliminated. Therefore, the proper use of lubricants is critical to the healthy development of the plastics industry . To accomplish this, the production of lubricants businesses should work hard in the restructuring of production . Promote environmentally friendly non-toxic lubricant inside and outside .

2013年11月27日星期三

New environmentally friendly calcium zinc stabilizers relatively fast development of complex rapidly

In the chemical industry, production, application of stabilizers is very broad, and more types of stabilizers , including composite stabilizer is the most widely used one . Composite stabilizer , there are many types , including calcium zinc composite stabilizer is a new environmentally friendly composite stabilizer , becoming the choice of many  aluminium stearate customers .
  Some people may think that low prices lead salt stabilizer , good thermal stability and select it. But this remind you of lead salts are salts of heavy metals , fine powder , once being inhaled, can cause lead poisoning, so in order sake of people's health , calcium zinc composite stabilizer changes the shackles of such a technique . It is mixed with a significant improvement in the uniformity of the resin dispersion . Mixing formula , simplified measurement frequency, to reduce the probability of loss and the resulting measurement error is brought about . A simple supply and reserve materials , conducive to the production , quality management . Offers the possibility of clean production of products, improve production conditions.
Due to environmental philosophy deeply rooted social , calcium zinc composite stabilizer win broad market rapidly developing world , prospects, countries are optimistic about its potential and its benefits to the environment , and it is its location, unique charm to the world PVC stabilizer  prove their role and status can not be replaced , the sustainable development of social stability needed it , but also environmental sustainability need it ! prospects for the development of the industry PVC non-toxic calcium zinc stabilizers tenths promising. Actively committed to the development and production of calcium zinc composite stabilizer. At present , the main products are calcium zinc composite stabilizer , PVC compound stabilizer , composite stabilizer and so on. As a professional production of composite stabilizer business, with advanced production equipment, laboratory  Chrolinated polyethylene equipment, testing equipment and professional R & D team , the company from the vital interests of customers, to green for the concept, to provide customers with high safety and environmental protection quality products, welcome customers to choose from.

2013年11月10日星期日

Flame retardant plastics must be added


   Everywhere in our lives, plastic products , plastic products in people's lives , the most widely used of a class of substances. We all know that plastics have flammable properties , life, many of  dibasic lead stearate the fire accidents , mostly caused by the combustion of plastic products , in order to protect people's safety and reduce fire hazard , plastic products in the course of processing , be sure to add flame retardants.
Combustion flame has prevented the material properties , the main demand for a flame retardant plastic , delay or prevent the plastic polymer plastics , especially burning. Increase the time it lit , lit self-extinguishing , difficult to ignite . Flame retardant additive is one of the important plastics processing , it can make plastic with flame retardant , self-extinguishing and smoke , thereby improving the safety performance of plastic products . On production and consumption , the current flame has  low molecular polyethylene become second plasticizer plastics additives, flame retardants consumption worldwide has more than 100 million tons. Flame retardant product selection , to comply with the following general requirements. ( 1 ) flame retardant , high efficiency ; ( 2 ) flame retardants with non-toxic , non-irritating odor properties , flame retardant process does not release toxic gases and smoke a lot . ( 3) The flame retardant has a good compatibility with the material can be uniformly dispersed in the plastic products , not carbon black  with plastics chemical reaction of the other components , does not affect the color and surface finish of plastic , and will not reduce the plastic the mechanical properties , electrical properties and other performance.
( 4 ) flame retardants in a wide range of different properties , in accordance with the use of different methods can be divided into additive flame retardant and reactive flame retardant . Additive flame retardant used for thermoplastics , is the largest amount of flame retardants , about 90% of total world retardants . The reactive flame retardant is used for thermosetting plastics .

2013年10月30日星期三

plasticizer compatibility of the polymer is good or bad in accordance with the trial and experience to determine

Less volatile plasticizer is usually a high boiling ester, a few are a low melting solid, they do not generally react with PVC. Conditions of use of plasticizers with the resin has good compatibility, low price, high plasticization efficiency, plasticized speed, durability (low volatility Yi shift is small, high extraction resistance), environmental stability good (light, heat resistance, bacterial resistance, chemical resistance and flame retardant), health is good (to people, livestock and crops, non-toxic, non-polluting, tasteless), electrical insulation, good viscosity stability is good. However, a plasticizer does not satisfy all the  aluminium distearate conditions. In actual use, the majority is composed of two or more and for each other, to get the best plasticizing effect and achieve perfect performance requirements. Plasticizer in a formulation used to make the products have reached the optimum value of all the performance is impossible, therefore, to ensure that the choice of plasticizer when the first major performance requirements. Such as children's toys and food packaging and other requirements are mainly non-toxic, beautiful appearance; plastic sheeting requirements harmless to crops, light, heat; wire and cable materials are the main PVC window stabilizer  requirements and good electrical insulation. In addition to these requirements, the plasticizer should also focus on the selection of the following factors: PVC resin performance; product performance required; plasticizer processing adaptability, cost. Consider the performance of the plasticizer itself, compatibility of the plasticizer most important, it is a plasticizer selected fundamental factors must be considered. Plasticizer and resin compatibility, then plasticized high efficiency, plasticizers no segregation, no exudation, product flexibility and long service life. In the production practice, plasticizers in polymers mainly based on the compatibility with the test quality and experience to determine. Compatibility evaluation method is simple plasticizers, resins, and a suitable solvent by mixing, to prepare a homogeneous solution was slowly cast into a film, its transparency is observed to judge. Homogeneous transparent film represents good compatibility, fuzzy means poor compatibility. Another method plasticizer PVC resin by mixing uniformly heated to plasticizing was cooled to room temperature, and observe any signs of exudate. No vegetable stearic acid  description plasticizer exudation good compatibility, oozing plasticizer compatibility explained more worse. According to a general rule, the more similar the easier it immiscible polar. Thus, the solubility parameter of the plasticizer and resin solubility parameter closer. Both compatibility as possible. Dielectric constant is a function of molecular polarity, dipole moment, and it is subject to great influence of hydrogen bonds. Determine the dielectric constant can be used as a plasticizer compatibility parameter. According to the solubility parameter of PVC, plasticizers generally used 8.4-11.4 solubility parameter, dielectric constant of 4-8.

2013年10月27日星期日

Impact modifiers described in some detail

The reason why certain polymers show brittle at room temperature , which is mainly determined by the structure of the polymer itself . Polymer
The brittleness and its molecular main chain flexibility , the molecular chain of the more flexible , its brittleness is smaller , whereas the greater brittleness . All Movies
A flexible polymer chain affected by factors such as the main chain structure , a substituted group, the polymerization degree , crosslinking degree of the polymer can affect the brittle
Sex . To improve the toughness of Impact modifier for PVC  the material , the following three main ways : in
Rubber component introduced into the polymer structure , as in the bulk polymerization of styrene butadiene component may be introduced in
Preparation of high-impact polystyrene (
HIPS, which in situ in the reaction kettle modification techniques suitable for mass production . In
Introducing the polymer backbone monomers low glass transition temperature , such as bisphenol
A polycarbonate raw
Production . Through
After some modification method would have the effect of toughening complexes were blended with polymer materials ,
Thereby enhancing the impact properties of polymeric materials . Such complexes known as impact modifiers , these additives is mainly used polyvinyl chloride
Ene, polystyrene and other plastics . The modified method has the freedom and flexibility characteristics.
1.1
Mechanism of impact modifier
The impact modifier in the polymer research, although there are a large number of scholars have carried out a series of fruitful work , but to
Today there are some issues unresolved , so it is no unified theory. Different scholars have proposed a different interpretation ,
Summarized in the following: rubber absorbs energy theory , shear yield theory, theory of cracks , crazing shear zone management
On other . Due to the use of rubber or elastomer -modified impact of plastics material will also reduce the rigidity of the self
Since there has been replaced by vegetable stearic acid  rigid particles of rubber and elastomer toughened polymers ideas, and the corresponding emergence of non-
Rigid polymer particle toughening machine theory .
Rubber absorbs energy theory
Is stretched when the cross section is substantially found not shrink , thereby setting
Want to cavitation occurs inside the material and the density becomes small ( approximately 8% reduction )
Year. They think its elongation stress whitening phenomenon
Is generated within the material of the hole caused by the scattering of light . Therefore, the argument put forward : when the material strain , in its internal generated a lot of very fine cracks , then there must be a
Of rubber particles across the crack , thus preventing rapid crack
Rapid expansion , while the rubber particles in its consumption of energy during deformation due
, Thereby improving the toughness of the material . As shown, located
Rubber particles in a growth of the crack face , such that material by
To break the impact absorbed energy equal to the Brittle Fracture
We can add on to be broken rubber particles acting combined. While
Explained tensile yield , must liquid stabilizer  assume the formation of a large number of micro- cracks in the rubber particles absorb energy schematic
And each micro-cracks were blocked by rubber particles , micro-cracks are adjacent the substrate a thin layer of polystyrene are separated . Thus, a large tensile strain can be micro- cracks open, the rubber particles are
Elongated and polystyrene layers bend to achieve. Accordingly, they assume that the rubber particles have a "bridge " effect as well as particles having a high flexibility and good adhesion to the substrate with the premise . This theory is that it is the lack of attention to the rubber , while ignoring the polymer matrix . Toughened polystyrene and polyvinyl chloride is concerned, both in the fracture behavior of a significant difference , which is not easy to explain the theory of micro-cracks

2013年10月24日星期四

flocculation of aluminum sulfate application

Earlier we said aluminum sulfate use is the second largest in wastewater treatment applications, it is a typical industrial water treatment chemicals , industrial water treatment has a wide range of processing capabilities, however, it is most important is PVC profile stabilizer  as flocculation agent. So, what is the flocculation and sedimentation , flocculation applications it is kind of how it .
What is flocculation
Flocculation is particulate matter in the water for flocculation and sedimentation process. After adding coagulant in water , in which colloidal and suspended solids dispersed particles generated in the interaction of molecular forces floc and in the settlement process they collide cohesion, its size and quality continues to become larger, increasing the settling velocity . Depends not only on removal of suspended  Methyl tin solids sedimentation rate , and the depth and precipitation . Surface water formed after adding coagulant alum , sewage organic suspended solids in the activated sludge process will appear in the precipitation flocculation phenomenon.
Flocculation of aluminum sulfate application simply say that aluminum sulfate dissolved in water to make the water and natural rubber fine particles agglomerate into large floc, thereby  liquid stabilizer removing from the water , so as water supply and wastewater coagulant. Flocs grow to a volume after the force of gravity from the water phase precipitation , thereby removing large suspended solids in the wastewater , so as to achieve the effect of treatment . Of course, as an industrial water treatment chemicals , aluminum sulfate is not currently the best results , it is less efficient than the current polyacrylamide flocculation is strong, but the price is much lower than it polyacrylamide , PAC and other polymeric flocculation agent

2013年10月23日星期三

Detailed description of the main lubricant

Grease, inorganic and organic grease grease 4 categories.
Solid lubricant
Sports watch two opposite surfaces for reducing friction and wear of the solid powder or a film. Commonly used solid lubricant with stone
Lubricants
Ink, molybdenum disulfide, PTFE, nylon, boron nitride and fluorinated graphite. Solid lubricant mainly used  PVC stabilizer for fittings in demanding tough conditions, such as heavy (heavy machinery and metal cold extrusion dies, etc.), high temperature (steel machinery, nuclear reactors such as stents), low speed (Machine Tool, etc.), ultra-high vacuum (spacecraft machinery, etc.), cryogenic (liquid hydrogen and liquid oxygen pump, etc.), strong radiation (nuclear reactors, etc.), strong corrosion (chemical equipment, etc.), pollution (thrust spacecraft systems, textile machinery and paper machinery etc.), after the installation staff inconvenience close  oxidized PE WAX  (nuclear energy machinery and aircraft parts and other seals) and requirements of the environment is very clean (food, medical and pharmaceutical machinery, etc.) and other occasions. General use of the solid lubricant are: ① Overall use, such as nylon or PTFE, plastic gears, bearings and cams; ② in the form of a variety of coating film, such as adhesive film, a conversion coating, plasma sprayed film and sputtering film; ③ a composite material or combination of materials used in the form, such as the metal-matrix Diethylene glycol dibenzoate  composites and metal liquid impregnated into the pores of the metal graphite composite material such as graphite; ④ direct use of solid lubricant powder or the powder such as graphite powder and molybdenum disulfide powder added to the oil, the use of grease.

2013年10月21日星期一

PVC processing aids some of the main applications

This uses the advanced polymerization techniques and drying process development high molecular weight polymer , PVC products can promote gelation , improve melt fluidity and improved processing Metal stearate  performance. Widely used in PVC profiles , sheet, pipe , pipe fittings and foam products .
Basic physical performance indicators:
Appearance: white flowing powder
Intrinsic viscosity (η) 25 ℃: 8.0 ~ 11.0
Particle size ( 40 mesh pass rate ) ≥ 98
Volatile (%) ≤ 1.0
Bulk density (g/cm3) 0.3 ~ 0.5
Application Features
 In PVC processing to add this product to promote gelation PVC , the melt fluidity is improved , thereby improving the  red iron oxide thermal melt strength and elongation , improved internal and surface quality products ; while reducing the melting time and increase productivity ; addition , can significantly reduce the variety of ingredients used in the processing of the deposition surface of the device , to ensure smooth production. High yield, high melt fluidity finish plasticizing fast , modified high efficiency cell uniformity , density and other characteristics.
Applications
 Non-transparent products, such as pipe fittings, profiles, sheet foam pipe foam panels.

2013年9月28日星期六

metal soaps introduce some of the main waterproofing agent

Waterproofing agents of metal soaps soluble metal soaps (the soluble soap ) waterproofing agent , and asphaltenes II metal soap waterproofing agent . Water soluble metal soaps agent is stearic acid , ammonia , potassium hydroxide ( or soda) and water heating by  magnesium hydroxide flame retardant mixing a saponified preparation waterproofing agent . This product is a paste -like, mixed with the cement mortar or concrete, the cement particles and aggregates can form a hydrophobic adsorption layer and between the formation of insoluble matter , from the tiny pores and clogging the capillary filling passage effect. Bituminous waterproofing agent is a metal soap liquid petroleum asphalt, lime and water, mixing, grinding is made by drying . Mixed with the PVC foaming board stabilizer  cement mortar and concrete ... a pore size in the nanometer to millimeter . If the surface in contact with the aqueous solution by capillary action will be adsorbed to the surface of concrete and further penetrate into the concrete ; same time , the solution of harmful substances such as chlorine ion , sulfate ion and the like can also be easily transported water into the concrete , reinforced concrete structure to bring serious corrosion damage [ 1 ] . At present , domestic and foreign has  red iron oxide been widely adopted penetration waterproofing agent on the concrete surface water treatment [ 2 ] , but using this traditional approach , the penetration depth of the water repellent is very limited , and in some special cases waterproof effect is not very satisfactory . If you can water repellent mortar or concrete as a component incorporated therein , its protection would be better, this approach is within the mixed water treatment. This paper mainly uses four different types , two kinds of different dosage of metal soap , add it to the concrete mixture to compare , test and research within the mixed metal soap of concrete compressive strength, water absorption coefficient by capillarity and resistance to chloride ion intrusion ability.

2013年9月27日星期五

toxic ammonium aluminum sulfate do, what is the standard of its use

The use of ammonium aluminum sulfate solution was added ammonium aluminum sulfate solution was prepared from a series of n-butyl stearate  operations. It is mainly used as a buffer, neutralizer, leavening agent, water purifying agent, pickles and boiled, stewed food color fixative. So, ammonium aluminum sulfate poisonous? Aluminium ammonium sulfate in food applications use some kind of standard?
Toxic ammonium aluminum sulfate do
In daily life, if excessive intake of aluminum, it will affect people's intelligence, bone demineralization and other hazards. Although ammonium aluminum sulfate chemical additives, but it carbon black powder  has a non-toxic, food grade it is a legitimate food additive, do not exceed the maximum amount prescribed by the State, the human body is no health hazard.
Aluminum ammonium sulfate using the standard requirements
Chinese regulations can be used for fried foods, shrimp, soy, baking powder, biscuits, puffed food and aquatic products, according to iron oxide black  production needs appropriate use of aluminum residues ≤ l00mg/kg. World Health Organization's assessment, the provisions of the daily intake of aluminum 0-0.6mg/kg, kg body weight of a person, that is, a 60kg person allows intake of 36mg. This prescribed, except for aluminum ammonium sulfate, but also applicable to other, such as aluminum chloride, aluminum sulfate and potassium aluminum ions containing chemicals.

2013年9月22日星期日

PVC impact modifier use of some

( 1 ) Chlorinated polyethylene (CPE) is the use of HDPE in the water phase of the powdery product by suspension chlorination , so as to increase the degree of chlorination of HDPE original crystals become amorphous elastomer. Used as a toughening agent C? E, containing 25-45 % amount is generally C1 . CPE wide source of low price, in addition to a toughening effect , but also has a cold resistance, weather resistance , flame resistance , and chemical resistance . At present in China is dominated by CPE impact modifiers , especially in the production of PVC pipes and profiles , most  plastic processing aid plants use CPE. Generally added in an amount of 5-15 copies. CPE can be used in conjunction with other plasticizer , such as rubber , EVA , the effect is better, but even in aging rubber additives .
(2) ACR is methyl methacrylate , acrylate monomers , ACR is best developed in recent years, impact modifiers , which can increase the impact strength of the material several times. ACR core-shell structure is an impact modifier , methyl methacrylate - ethyl acrylate composition of the shell polymer , crosslinked acrylic or butyl rubber elastic body is formed as the core of the particle distribution of the inner segment . Particularly suitable for outdoor use PVC plastic products, impact-modified PVC plastic window profiles used in the ACR as impact modifiers and other modifiers processing performance compared with the smooth surface, good aging resistance , high strength welding angle characteristics, but the price CPE, high 1 /3. Common foreign brands such as K-355, the general amount 6-10 copies. The current domestic production of the manufacturers ACR impact modifier fewer manufacturers use less.
 (3) MBS is methyl methacrylate , butadiene and styrene copolymer of the monomers . MBS between the solubility parameter of 94-9.5 , with PVC solubility parameter close, so when the good compatibility with PVC , its most important feature: After adding PVC products can be made transparent . Generally added in PVC 10-17 parts of PVC , the impact strength can be increased 6-15 times, but the MBS in amount more than 30 parts , PVC impact strength decreased. MBS itself has a good impact resistance , good transparency , light transmission rate of 90 %, and to improve the impact resistance while other properties of the resin , such as tensile strength , elongation at break little effect . MBS higher prices , often with other impact modifiers, such magnesium hydroxide flame retardant  as EAV, CPE, SBS , etc. and use . MBS poor heat resistance , weather resistance , not suitable for long-term outdoor use made ​​products, generally do not do plastic doors and windows profile production impact modifiers .
 (4) SBS is a styrene -butadiene- styrene block copolymers, also known as thermoplastic rubber, thermoplastic elastomer part , the structure can be divided into star and line two kinds. SBS ratio of styrene to butadiene is mainly 30 /70, 40 /60 , 28 / 72 , 48/ 52 several. Mainly used as HDPE, PP, PS impact modifiers in an amount 5-15 parts . SBS primary role is to improve the low temperature impact resistance . SBS poor weather, not suitable for long-term outdoor use made ​​products.
5) ABS is a styrene ( 40% -50 % ) , butadiene ( 25% -30 % ) , acrylonitrile ( 25% -30 % ) terpolymer used mainly plastic , but also with the impact of PVC modification of the modification effect is also very good low temperature impact . ABS is added in an amount of 50 parts , PVC , the  plastic processing aid impact strength can be quite pure ABS . ABS is generally added in an amount of 5-20 parts , ABS poor weather , unsuitable for long-term outdoor use products, generally do not do plastic doors and windows profile production impact modifiers .
(6) EVA is an ethylene vinyl acetate and acid copolymer, vinyl acetate changed into a crystalline polyethylene , vinyl acetate content of a large difference , and the different refractive index EVA and PVC , transparent products is difficult to obtain , therefore , often the EVA resin and used with other impact . EVA dosage of 10 parts or less .

2013年9月21日星期六

PVC heat stabilizers some of the methods used

PVC heat stabilizers torque rheometer test method
Mimic the actual torque rheometer PVC processing a typical small pilot-type apparatus . Outside of the instrument a closed processing tank , connected to the instrument by the computer can polyethylene oxide  control the machining tank temperature, and within two roll speed , torque rheometer added quality of materials is generally 60 ~ 80 g, depending on the apparatus and different models . Experimental steps of: preparing in advance with different thermal stabilizer masterbatch based on PVC masterbatch formulation , in addition to other ships and ACR, CPE, CaCO3, TiO2, lubricants and the like . Torque Rheometer advance the set temperature , when the temperature rose to specify and steady speed , will be weighed mixture added processing chamber , quickly closed records on a computer connected to a variety of parameters , namely flow  n-butyl stearate curve . After processing , you can also get different extrudate physical characteristics , such as whiteness, whether shaping , smoothness and so on. These parameters can determine the corresponding potential industrial heat stabilizers , heat stabilizers suitable shall have suitable torque and plasticizing time of the extrudate should be preferably molded and whiteness, surface smoothing . Torque rheometer in laboratory studies and between industrialized mass production to build a convenient bridge.
PVC heat stabilizers roll blackening test
Determination of thermal stability as a dynamic effect of a class of helper methods , dynamic two-roll used in the  iron oxide black absence of the rheometer , the experiment instrument select double rolled sheet , which together with the high-speed mixed powder , compression molding , the resulting samples were subjected to extruded repeatedly until the black test piece until completely black record time , the time is called blackening . Blackening by comparing the length of time to determine the type of thermal stabilizer effect of the thermal stability of PVC .

2013年9月17日星期二

Brightener in the chemical structure have a cyclic conjugated system

Brightener (brightener / Optical whitener) is a type of fabric and can enhance the whiteness of paper and other organic compounds. Also known as optical brighteners, fluorescent brighteners . Fabric, etc. are often contained as impurities, and yellow colors , in the lead stabilizer  past are used for bleaching chemical bleaching methods , add brighteners used in the product approach. Its role is to absorb the products of invisible ultraviolet radiation into fluorescence radiation purple blue , yellow with the original two colors, a white light radiation , improve the whiteness in the Glycerol monostearate  sunlight . Brightener has been widely used in the textile , paper, detergent , soap , rubber, plastics, pigments and paints and so on.
Brightener in the chemical structure have a cyclic conjugated system , for example: derivatives of stilbene , pyrazoline phenyl derivatives, benzimidazole derivatives , phenyl pyrazole derivatives , coumarin derivatives , and naphthalimide derivatives. Stilbene derivatives which yield the largest , such as 4,4 ' - bis ( 4,6 - diphenyl amine triazin -2 - amino ) stilbene -2,2' - disulfonic acid sodium salt is a the wider use of optical brighteners, whitening tradename TA. Such brighteners have  black iron oxide been widely used in papermaking, textile , detergent and soap industries. Brightener AD is phenyl derivative of pyrazoline , scientific name 1 - ( methylsulfonyl ) -3 - (p- chlorophenyl ) pyrazoline, mainly for spinning of acrylic fiber , textiles and plastics products for the production. 4 - methyl-7 - dimethylamine coumarin naphthalene neighbors belong oxa ketones can be used for wool fabric , nylon fabric, soaps and detergents and other products.
The largest class of fluorescent whitening agent VBL, CXT and paper liquid whitener . Generally divided into two categories brighteners , and the other is water insoluble brightener . The former can be used for paper, paint , detergent, cotton fabric whitener . The latter can be used for chemical fiber, plastics and other whitening.



2013年9月8日星期日

[ Fluorescent Brightener Fluorescent pig ]

Cloned transgenic pigs fluorescence experiment itself does not have practical value, but with a certain scientific value . Because green fluorescent protein marker role played cloned transgenic pigs fluorescence experiments showed somatic cell cloning technology  chrome oxide in pigs have been successful. If you put the green fluorescent protein gene ( or fusion on ) gene of practical value , such as human interferon resistance gene or genes , it is possible to get a resistance to disease or capable of producing human interferon transgenic cloned pigs . Cloned transgenic pigs fluorescence experiment itself does not have practical value, but with a certain scientific value . Because green fluorescent protein marker role played cloned transgenic pigs fluorescence experiments showed somatic cell cloning technology in pigs have been successful. Fluorescent pig test success , marking a state through somatic cell nuclear transfer technology to produce transgenic pigs  carbon black level of development. Between any organism can be genetically modified , and, in transgenic animals can also be genetically modified again . Some parts of the pig to fluoresce , is genetically result.
Reported that researchers first implanted in porcine somatic cells can synthesize the jellyfish green fluorescent protein gene , remove the nucleus after its implantation in pig unfertilized eggs , made of embryos, then implanted in the uterus of pigs . 15, that the first cloned transgenic pigs born. Through the pig DNA ( deoxyribonucleic acid ) for analysis, the body containing the jellyfish gene , and thus is recognized as a transgenic pig . "GM is a bio-technology, is to an exogenous gene into an organism , expressed it in this body , we need to get the gene product ( protein ) ." Between organisms are able to carry out any genetically modified in transgenic animals can also be genetically modified again . Generally, after several transgenic nor artificially " create" a new species ; since species not by a few genes of the decision. However, if too much exogenous genes transferred , may cause the animal damage normal physiological activity , can not survive or reproduce and lead to failure.
Many organisms can be light, but the involvement of protein and luminescence mechanism. Transferred to the pigs in vivo gene contains jellyfish green fluorescent protein , this protein can be excited in the UV light . In Japan cloned transgenic pigs in this experiment , some parts of the pig in the ultraviolet irradiation, emit fluorescence . This is the result of in vivo gene containing the jellyfish . Why jellyfish gene to produce this wonderful phenomenon can ?
" Jellyfish light reason , because it contains a green fluorescent protein of this protein in the UV irradiation, in the  chromium oxide excited state , can absorb photons from the UV- release , emit longer wavelength light , the green . "
There are many kinds of organisms can be light, such as certain bacteria, insects, cnidarians , they can glow with a protein related , but the mechanisms involved are not the same proteins and luminous . For example, fireflies glow of its in vivo oxidation of luciferin luciferase result . In the middle there is a jellyfish called luminous jellyfish protein , calcium ions in the environment is able to issue a blue jellyfish green fluorescent protein in the absorption of the light emitted by jellyfish issued only after the green. "But it was found that the emission of green fluorescent protein does not require the involvement of other factors , as long as irradiation with ultraviolet light can be so , and the green fluorescent protein is extremely stable, and no toxic , so the application of the most biological studies . "

Fluorescent Brightener diamond fluorescence

In general , the diamond fluorescence is a relatively specialized problems, asked this question shows that you have a better understanding of the diamond . Most people on the level of understanding of the diamond is now still at the stage of literacy . So the time of  potassium stearate purchase are often very concerned about whether VVS, others are downplayed . Now makes China in the global diamond market is the most strange ...... diamond ring fluorescence effects of good or bad is another important indicator.
First, the fluorescence of the diamond is it? Important to you ? If in addition to the diamond 4C What is noteworthy place , then that is a fluorescent indicator ! Fluorescence indicator , English Fluorescence, is an important indicator , which affects the color of the diamond .
 Fluorescent indicator refers to vegetable stearic acid  the diamond will be issued under the intense ultraviolet blue light intensity. Fluorescence international level from high to low were none ( no ), faint ( weak ), medium blue ( medium blue ) / medium yellow ( medium yellow ), strong blue ( strong blue ) yellow ( strong yellow ) and other levels. For those who adhere to traditional perfectionist , the diamonds are not a fluorescence , ie fluorescence level indicators are none .
 In fact, China's new standards promulgated by the diamond has , though not on the fluorescence of strict , but absolutely clear requirements. Country by diamonds glow under UV light intensity classified as "strong" , "medium" , "weak ", "no " four levels . But most consumers do not understand , so I do not need this indicator , resulting in  white blowing agent identification of the identification certificate issued by the agency generally does not indicate the fluorescent indicator , it also gives many jewelers advantage of the loophole .
 However, there are a few people like abroad, strong blue diamond grade , will go to the designated special buy this diamond . Sometimes because of strong blue diamond will look cool ( not to mention the strong blue diamond grade levels also a lot cheaper than none

2013年9月7日星期六

PVC heat stabilizers some of the principles

speaking , those who can improve the thermal stability of the polymer additives are known as heat stabilizers. Because of the poor thermal stability of PVC , so most of the world are used for PVC stabilizer PVC . Therefore , the commonly used stabilizers for PVC means polyvinyl chloride and copolymers of heat stabilizers.
Generally in accordance with the  heat stabilizer for panel chemical composition of a heat stabilizer to the classification can be as basic lead salt , a metal soap, organic tin , epoxy compounds, phosphorous esters, polyhydric alcohol. In terms of the role of size can be divided into the main stabilizers for PVC stabilizers and auxiliary stabilizers. Auxiliary stabilizing agent itself or only a small stabilizing effect without thermal stability , but it and the primary stabilizing agent and having a synergistic effect ; primary stabilizer is generally a metal-containing heat stabilizer. And epoxy compounds, phosphites , polyols and other pure compounds are generally used as an auxiliary stabilizer .
As to achieve good stability of PVC often need to use a variety of pvc heat stabilizer , so that some products is titanium dioxide  a combination of stabilizers for PVC component complex , a composite stabilizer , such as barium cadmium stabilizer, barium zinc stabilizer etc. , these composite stabilizer usually has joined the PVC processing lubricants and other additives needed to facilitate the users. Many varieties of composite stabilizer with powder, paste , liquid, three forms [ 1 ]
( 1 ) absorption of hydrogen chloride
Me (OOCR) 2 + 2HCl === MeCl2 + 2HOOCR
Wherein Me is : Pb, Ba, Cd, Ca, Zn, Sn, Sb, Mg, Sr , etc.
( 2 ) eliminate the instability of the chlorine atoms substituted or eliminate unstable chlorine atom.
( 3 ) to prevent the auto-oxidation of PVC in the  liquid stabilizer hot oxygen and shear stress , easily oxidized by O2 degradation .
( 4 ) metal salts of maleic acid, or to inhibit or eliminate the double bond becomes shorter and less .

2013年8月28日星期三

Supply of PVC impact modifier

 Second, the main performance:
1, can be used as a polymeric plasticizer , and in the long-term use will not migrate to the product surface precipitation .
2, low temperature performance blends , polarity, anti-UV, anti- chemical and microbiological corrosion performance improved significantly .
3 , added to the PVC, ABS or PVC / ABS alloy to improve its thermal stability.
4 , the European regulatory approval for food contact industry .
5, in the PVC processing , Elvaloy ® 4924 can significantly improve the impact properties, including low-temperature impact resistance .
Third, the  plastic flame retardant theoretical basis and the impact modifier advantage
PVC low-temperature impact strength are the main reasons is because a strong PVC molecules caused by intermolecular forces , because PVC strong molecular attraction between molecules makes PVC products subjected to external shock , PVC molecules difficult to produce the relative displacement , so that the impact energy can not be effectively converted to internal frictional heat , resulting in rupture of the material . Adding a plasticizer , CPE PVC because reducing the attraction between the molecules leaving the improved impact strength , but low molecular weight organic plasticizers are added when less easy to precipitate , and an anti- volatile plasticizing effect instead, the material becomes brittle and will greatly reduce the use of a large number of mechanical properties , it is difficult to use in hard products . The CPE of the polymer precipitated polymer although there is no problem , because its glass transition temperature above -10 ℃ , so the  iron oxide black low temperature impact performance is not ideal. DuPont Elvaloy 4924 is an ethylene - vinyl acetate carbonyl (E / VA / CO) copolymer , molecular weight PVC rather , is a permanent plasticizer , not precipitated , anti-migration , can significantly reduce the intermolecular force PVC , the glass transition temperature - 36 ℃, to overcome the low glass transition temperature and the CPE plasticizers easy to produce anti- plasticization defects. Not only can greatly improve the impact properties of rigid PVC and can effectively improve the weathering resistance.
Fourth, technical indicators:
Melt index (g/10min) 9
Density (g/cm3) 1.03
Tensile Strength (Psi) 1580
Elongation at break ( % ) 736
Glass transition temperature (℃) -36
Melting point (℃) 70
Solubility parameter 8.68
Five , the main application
1 , rigid PVC: improved formability , reduce subsequent vacuum forming temperature , forming speed faster , improve impact resistance ;
2, soft PVC: to increase weather resistance , low temperature resistance , chemical resistance and no -shift problems and Diethylene glycol dibenzoate  improve impact resistance
3 , Footwear: with rubber handle, can increase wear and slip effect , against the soapy water and oil also increased many aspects of behavior .
4 , Other : PVC cable , PVC film, PVC leather and PVC and rubber blend products.

2013年8月23日星期五

stearate, stearyl alcohol ester

One kinds of stearyl alcohol ester synthesis method in the case of organic synthesis technology ester compound to
Stearic acid and stearyl alcohol as raw materials, characterized in that the metal oxide catalyst under a nitrogen atmosphere into
Line esterification, alcohol, filtration obtained stearyl stearate; said metal oxide is magnesium oxide or stannous
Or iron oxide in an  tin stabilizer amount of stearic acid and stearyl alcohol, the total weight of 0.03 to 0.12%. Rational use of the present invention gold
Metal oxide as a catalyst, such catalysts have high selectivity, non-corrosive, simple production process, through
Through the filter can be removed, so that product quality is stable; while the metal oxide catalyst according to requirements, optimized
Design and trial research, reasonably determine the ratio of raw materials, amount of catalyst, reaction temperature, time and white blowing agent  other process parameters
Hours and conditions, mild reaction conditions, using simple equipment, so that equipment investment is more savings.
018 words a dry method production process and apparatus stearate
0002 Preparation of stearate
8005 stearate step synthesis method
1003 stearate prepared nanocrystalline ceramic powder
3008 improved stearate composition and preparation method
017 Preparation of stearic acid complexation of metal nano-dispersion strengthened alloy powder method using pre-
3013 emissions-step synthesis method for the production of calcium stearate
8001 non-aqueous stearate step Synthesis
0010 improved stearate composition and  chrome green preparation method
1007 adhesive lubricant containing metal powder composition comprising glyceryl stearate, and the adhesive lubricant
3012 Screw Reactor reactive extrusion process to produce heavy stearate methods
3006 Preparation of stearate
8004 stearate prepared novel nano ceramic powder materials technology

2013年8月19日星期一

retardants Overview

Most plastics are flammable. With the plastic in the construction,

furniture, transportation, aviation, aerospace, electrical and other

aspects of the widely used to improve the acrylic processing  flame retardancy of plastics has

become a very urgent issue. Inhibiting polymer flame retardant is a class

of flammability additives, they are mostly of the Periodic Table Ⅴ, Ⅶ Ⅲ

elements and compounds; especially phosphorus, bromine, chlorine, antimony

and aluminum compounds. Sub-additive flame retardants and reactive types.

Flame retardant halogen-containing primarily phosphate and phosphate, a

halogenated hydrocarbon, antimony oxide, and aluminum hydroxide. Advantage

is easy to use and adaptable. However, the addition of capacity of 10% to

30%, often affect the performance of plastics. Reactive flame retardant

containing the elements actually monomer, it has little effect on the

plastic properties. Common reactive flame retardants, halogenated

anhydrides such as for polyesters, for epoxy resins of tetrabromobisphenol

A, and phosphorus for polyurethane polyol. Initially flame retardants used

in the U.S., after the 1960s, the tio2 anatase  amount of surge current usage after

plasticizer. Consuming most varieties of plastic flame retardant polyvinyl

chloride, polystyrene, polyurethane foam, unsaturated polyester, ABS resin

and polypropylene.
Most plastic is flammable, its products, which brought a lot of application

security risks. Precisely, flame retardants, flame retardants known as more

appropriate, because "flame" contains two meanings flame retardant and

smoke suppression, compared with the yellow iron oxide  broader concept of flame retardants.

However, long time, people have become accustomed to the concept of use of

flame retardants, so the current literature is actually referred to in the

flame retardant and smoke suppression effect of functional additives in

general.

2013年8月16日星期五

PVC processing aids

PVC is a very special thermoplastics, it is easy to decompose the pure resin processing, poor mobility, low impact strength, poor weather resistance and therefore require in the plastic flame retardant  process to add various auxiliary materials to improve their performance. Such as: lubricants, heat stabilizers, impact modifiers, processing aids. Processing aids in the development and application process, by product ingredients can be divided into the following broad categories: methyl methacrylate (MMA) / acrylate copolymer, MMA / styrene copolymer, acrylonitrile / styrene, etc., currently Use the largest, the best is MMA / acrylate copolymer. 2, the role of
Processing aids (Processing Aid) main role is to:
1) to accelerate the flame retardant  process of PVC plastics.
2) to improve the rheological properties of the thermoplastic melt.
3) improve the thermo-elastic mechanical properties of the melt state.
4) improve the quality of products, the appearance of the other integrated functions.
Although the processing aid added is less, but to improve the performance of PVC processing is very important. Impact modifier and  barium stearate processing aid ACR ACR are acrylate polymer, but because of the different formulations performance ratio and different structures, impact the ACR about 10-20% of methyl methacrylate and acrylic acid about 80-90% esters. MBS impact modifier ACR as the same as the core-shell structure. And MBS, CPE impact modifiers, etc. compared to the processability and weather resistance, good surface finish, especially for outdoor goods, in foreign countries, acrylic impact modifiers because environmental protection, excellent performance, weather has been replaced by high-performance CPE impact modifier.