Research Status toxic PVC heat stabilizer of PVC is the world's second largest synthetic resin polyethylene production after more than 90,000, however, PVC, there are some shortcomings difficult to overcome, including poor thermal stability was most prominent . PVC due stearic acid to poor thermal stability, softening temperature and decomposition temperature difference is small, has caused great difficulties to the process, so the process must be added a certain amount of heat stabilizers to improve its thermal stability. Currently, lead salt is the largest amount of heat stabilizer. In building a harmonious society and ensure the sustainable development of the premise that people's awareness of environmental protection and health gradually strengthened, therefore, low toxicity, no pollution, has become complex and efficient development direction of PVC heat stabilizers.
Thermal stability of PVC resin is Polyethylene wax one of the oldest synthetic thermoplastics, has difficulty burning, good mechanical properties, low prices, abundant sources of raw materials, synthetic mature technology, which is widely used in construction, telecommunications, transportation, electronics , chemicals, packaging and other industries. PVC heat stabilizers in the heat or subjected to high energy radiation, such as ultraviolet light, "the impact of de-hcl autocatalytic reaction occurs, the thermal decomposition mechanism is generally believed that there are PVC stabilizer for panel three kinds of radical mechanism oxygenated environment;. (2) ion mechanism under a nitrogen atmosphere; main factors (3) single molecular mechanism under vacuum conditions affect the thermal decomposition is pvc chain structure, refers to a branched, double, allyl chloride, head structure and molecular weight of conjugated double bonds etc. "effect; addition, oxygen, HCL additives and other external factors also have an impact.
WSD Chemical is specificaitonal manufacturing plastic chemical in china for 10 years, WSD intenal lubricant and supply all kinds plasic chemicals ,such as Metal soaps, PVC heat stabilizers,PVC plasticizer, Impact modifier,plastic lubricant processing aid , PVC lubricant flame retardant, pigments and optical brightener.
2013年12月30日星期一
2013年12月29日星期日
Plastic heat stabilizer by category
Heat stabilizers are a class of polymers can prevent or reduce the heat in the course of processing and degradation or cross-linking occurs , extending the life of composite additives . Usual stabilizers can be divided into categories according to the main component of salt , fatty acid soaps , organotin compounds, heat stabilizers, and the pure compound classes of organic compounds . 1 ) Heat stabilizer salt : salt stabilizer is the Stabilizers for pipe combination of the " base " of lead salts of inorganic and organic acids , such stabilizer having excellent heat resistance , weather resistance and electrical insulating properties , low cost transparency is poor, there is a certain toxicity, dosage is generally 0.5% to 5.0 %. ( Source Global polyurethane network ) 2 ) a fatty acid based heat stabilizer : Such a thermal stabilizer is a compound of a fatty acid composition of roots and metal ions , also called metal soap heat stabilizers , acid groups , and its performance and the kind of metal ions , generally the amount of 0.1% to 3.0%.
3 ) organotin heat stabilizers : class PVC heat stabilizer molecule with chlorine atoms to form unstable ligand and the ligand organotin carboxylate group and a chlorine atom unstable replacement . Features such heat stabilizers are high stability , good transparency , heat resistance, the downside is expensive.
4 ) Composite type heat stabilizer : Such a thermal stabilizer is a metal salt or soap as a kind of liquid or solid based compound and an organic tin -based compound , wherein the metal salts are calcium - magnesium - zinc , barium - calcium - zinc, barium - zinc and PVC plasticizer barium - cadmium ; common organic acids such as organic acids, naphthenic acid, oleic acid, benzoic acid and salicylic acid. 5 ) an organic compound heat stabilizer : Such a heat stabilizer except for a few primary stabilizers may be used alone (mainly nitrogen containing organic compound ) , but also a high boiling point include polyhydric alcohols and phosphites , phosphites often stabilizer, the metal can improve the weather resistance, transparency of the composite material , to improve the surface color of the article. Mechanism of action of a thermal stabilizer 2PVC
1 ) absorption and HCL, inhibit its auto- catalysis. Such stabilizers include lead salts , organic acid metal soaps , organic tin compounds, epoxy compounds, phenol salts and metal thiolate . They can react with HCL , HCL off PVC suppression response. 2 ) replacement of PVC molecules suppress unstable allylic chlorine atom de PVC. Organotin stabilizers such as a chlorine atom with an unstable ligand binding molecule PVC polyene structure with an addition reaction , a ligand , a chlorine atom with an unstable organic tin substitution 3 ) , formed in the destruction of a large conjugated system reduce coloration . Unsaturated acid salts or esters containing double bonds , and the PVC molecules conjugated diene double bond addition reaction , thereby destroying the structure of the conjugate , inhibiting discoloration. 4 ) capture free radicals and prevent the oxidation reaction . As the phenolic heat stabilizer can be added to block off the HCL, because Polyethylene wax phenol can be given by H atoms and radical degradation of PVC macromolecular radical coupling , not react with O2 forming material , and a heat stabilizing effect . Such a thermal stabilizer , one or both may have several roles .
Ideal for PVC heat stabilizers should be a versatile substance , or a mixture of some of the material, they are able to perform the following functions : First, replacement lively, unstable substituents ; second is to absorb and neutralize the release of PVC processing HCL, eliminating autocatalytic degradation of HCL ; Third neutralize or inactivate catalytic degradation of metal ions and other harmful impurities ; Fourth, through various forms of chemical reactions can be blocked unsaturated bond continues to grow , inhibiting degradation coloring ; five is the best shield against ultraviolet protective effect . Generally, heat stabilizers according to their performance with the use of special , very little is used alone , but most of the species in a powder form , some of which are highly toxic chemicals. For ease of use , to prevent dust poisoning, reduce toxic substances or substitute non-toxic substances, at home and abroad in recent years developed a wide variety of composite stabilizer , for example , the world famous German brand composite stabilizer Bear series , the United States , Germany, Japan , Netherlands and other countries , or organotin compound organotin stabilizers have a considerable market in China . Therefore , the development of China's efforts to promote the use of high efficiency, low cost , no dust pollution and toxic or low toxicity of new composite stabilizer is an urgent need for the development of China's plastics industry .
3 ) organotin heat stabilizers : class PVC heat stabilizer molecule with chlorine atoms to form unstable ligand and the ligand organotin carboxylate group and a chlorine atom unstable replacement . Features such heat stabilizers are high stability , good transparency , heat resistance, the downside is expensive.
4 ) Composite type heat stabilizer : Such a thermal stabilizer is a metal salt or soap as a kind of liquid or solid based compound and an organic tin -based compound , wherein the metal salts are calcium - magnesium - zinc , barium - calcium - zinc, barium - zinc and PVC plasticizer barium - cadmium ; common organic acids such as organic acids, naphthenic acid, oleic acid, benzoic acid and salicylic acid. 5 ) an organic compound heat stabilizer : Such a heat stabilizer except for a few primary stabilizers may be used alone (mainly nitrogen containing organic compound ) , but also a high boiling point include polyhydric alcohols and phosphites , phosphites often stabilizer, the metal can improve the weather resistance, transparency of the composite material , to improve the surface color of the article. Mechanism of action of a thermal stabilizer 2PVC
1 ) absorption and HCL, inhibit its auto- catalysis. Such stabilizers include lead salts , organic acid metal soaps , organic tin compounds, epoxy compounds, phenol salts and metal thiolate . They can react with HCL , HCL off PVC suppression response. 2 ) replacement of PVC molecules suppress unstable allylic chlorine atom de PVC. Organotin stabilizers such as a chlorine atom with an unstable ligand binding molecule PVC polyene structure with an addition reaction , a ligand , a chlorine atom with an unstable organic tin substitution 3 ) , formed in the destruction of a large conjugated system reduce coloration . Unsaturated acid salts or esters containing double bonds , and the PVC molecules conjugated diene double bond addition reaction , thereby destroying the structure of the conjugate , inhibiting discoloration. 4 ) capture free radicals and prevent the oxidation reaction . As the phenolic heat stabilizer can be added to block off the HCL, because Polyethylene wax phenol can be given by H atoms and radical degradation of PVC macromolecular radical coupling , not react with O2 forming material , and a heat stabilizing effect . Such a thermal stabilizer , one or both may have several roles .
Ideal for PVC heat stabilizers should be a versatile substance , or a mixture of some of the material, they are able to perform the following functions : First, replacement lively, unstable substituents ; second is to absorb and neutralize the release of PVC processing HCL, eliminating autocatalytic degradation of HCL ; Third neutralize or inactivate catalytic degradation of metal ions and other harmful impurities ; Fourth, through various forms of chemical reactions can be blocked unsaturated bond continues to grow , inhibiting degradation coloring ; five is the best shield against ultraviolet protective effect . Generally, heat stabilizers according to their performance with the use of special , very little is used alone , but most of the species in a powder form , some of which are highly toxic chemicals. For ease of use , to prevent dust poisoning, reduce toxic substances or substitute non-toxic substances, at home and abroad in recent years developed a wide variety of composite stabilizer , for example , the world famous German brand composite stabilizer Bear series , the United States , Germany, Japan , Netherlands and other countries , or organotin compound organotin stabilizers have a considerable market in China . Therefore , the development of China's efforts to promote the use of high efficiency, low cost , no dust pollution and toxic or low toxicity of new composite stabilizer is an urgent need for the development of China's plastics industry .
2013年12月26日星期四
PVC heat stabilizers commonly used test methods
To introduce PVC heat stabilizers of two common test methods. Something called : Torque Rheometer test method ; second test called the roll blackened test method.
PVC heat stabilizers torque rheometer test method
Torque rheometer is an imitation of PVC foaming board stabilizer the actual PVC processing a typical small scale type instrument . The outside of the instrument has a closed processing tank , through a computer connected to the instrument can be controlled by the temperature of the processing tank , and the rotation of the two rollers inside the added mass of material is generally a torque rheometer 60 ~ 80 g, depending on the instrument models and different. Experimental steps : preparing in advance the type comprising a heat stabilizer masterbatch based masterbatch formulations except PVC Usually there ACR, CPE, CaCO3, TiO2, lubricants and the like . Torque rheometer temperature set in advance , and when the temperature rose to specify the speed smoothly , it will weigh a good mix added processing tank , quickly closed the recording of various parameters on the computer connected to it , is the flow curve . After processing is complete, you can also get different physical characteristics of the extrudate , such as whiteness, whether shaping , smoothness and so on. With these parameters, you can determine the PVC heat stabilizer for fittings appropriate industrial potential heat stabilizers , heat stabilizers suitable should have proper torque and plasticizing time , extrusion molding should be better and whiteness, smooth surface and so on. Torque rheometer between laboratory research and industrial mass production to build a convenient bridge .
PVC heat stabilizers roll blackened test
As a method for dynamic determination based adjuvant effect of a thermal stabilizer , in the absence of double roller dynamic rheometer using a twin roll selected experiments tableting equipment, which together with the high-speed mixed powder , tablet molding, the carbon black resulting samples were subjected to extruded repeatedly until the black test piece until the recording time of the fully black , called blackening time . By comparing the length of time to determine the blackening of different thermal stabilizers for PVC thermal stability effect.
PVC heat stabilizers torque rheometer test method
Torque rheometer is an imitation of PVC foaming board stabilizer the actual PVC processing a typical small scale type instrument . The outside of the instrument has a closed processing tank , through a computer connected to the instrument can be controlled by the temperature of the processing tank , and the rotation of the two rollers inside the added mass of material is generally a torque rheometer 60 ~ 80 g, depending on the instrument models and different. Experimental steps : preparing in advance the type comprising a heat stabilizer masterbatch based masterbatch formulations except PVC Usually there ACR, CPE, CaCO3, TiO2, lubricants and the like . Torque rheometer temperature set in advance , and when the temperature rose to specify the speed smoothly , it will weigh a good mix added processing tank , quickly closed the recording of various parameters on the computer connected to it , is the flow curve . After processing is complete, you can also get different physical characteristics of the extrudate , such as whiteness, whether shaping , smoothness and so on. With these parameters, you can determine the PVC heat stabilizer for fittings appropriate industrial potential heat stabilizers , heat stabilizers suitable should have proper torque and plasticizing time , extrusion molding should be better and whiteness, smooth surface and so on. Torque rheometer between laboratory research and industrial mass production to build a convenient bridge .
PVC heat stabilizers roll blackened test
As a method for dynamic determination based adjuvant effect of a thermal stabilizer , in the absence of double roller dynamic rheometer using a twin roll selected experiments tableting equipment, which together with the high-speed mixed powder , tablet molding, the carbon black resulting samples were subjected to extruded repeatedly until the black test piece until the recording time of the fully black , called blackening time . By comparing the length of time to determine the blackening of different thermal stabilizers for PVC thermal stability effect.
2013年12月25日星期三
Three factors affect PVC PVC heat stabilizers transparency
PVC heat stabilizers to some extent will affect the transparency of PVC. PVC heat stabilizers are also not missing PVC additives, no PVC PVC heat stabilizers so will lose a lot of practical value. So people are constantly biochemical studies of PVC heat stabilizers. The following three factors will affect the transparency of PVC PVC heat stabilizers, and we do a discussion.
1, the refractive index of the stabilizer
PVC resin, heat stabilizer and 1.52 to 1.55 and a refractive index of visible light or near the same, the better the transparency of PVC products, the transparency is low and vice versa.
2, stabilizer molecules (molecules) of linear length
Heat stabilizer molecule (or molecules) linear length of less than 400 ~ 735nm wavelength of visible light refraction less transparency higher, whereas less transparent.
3, a heat stabilizer in PVC, "solubility", i.e., the compatibility of
Compatibility is two or more Chrolinated polyethylene substances refers to the affinity of each when mixed. Compatibility is good that it is possible to achieve molecular level dispersion. A thermal stabilizer in the molten state has good compatibility with PVC resin. Do not form a two-phase, which is not obvious interface or interface, refraction less, more transparent PVC products. Liquid stabilizer than the corresponding solid metal soaps in PVC compatibility, the length of the linear molecule and smaller, and thus the higher the transparency of the PVC. Free radical polymerization of vinyl chloride is polymerized random, in addition to its first stable - tail structure, and the first - the first structure - CH2-CHCl-CHCl-CH-, tail - tail structure-CHCl-CH2-CH2-CHCl -; vinyl Results generated with coupling disproportionation CH2 = CH-CHCl-CH2-, and allyl chloride structure-CH2-CH = CH-CHCl-CH2 and the like.
Generating allyl chloride, chlorine and PVC flame retardant tertiary carbon double bond in the synthesis of PVC is its molecular chain structure is unstable factors of instability order: PVC internal molecular chain allyl chloride> tertiary carbon chloro> allyl end groups chloride> Chung chlorine. It is easily degraded because of instability in the structure of PVC molecular chains exist, if not for stabilization when modified PVC processing, the decomposition temperature is about 130 ℃, but that the PVC resin processing into useful products, molding Acrylic impact modifier temperature to at 190 ℃ or more. Thus, heat stabilizers must be added to improve its structure is stabilized.
So pvc needs to be added during the synthesis PVC heat stabilizers.
1, the refractive index of the stabilizer
PVC resin, heat stabilizer and 1.52 to 1.55 and a refractive index of visible light or near the same, the better the transparency of PVC products, the transparency is low and vice versa.
2, stabilizer molecules (molecules) of linear length
Heat stabilizer molecule (or molecules) linear length of less than 400 ~ 735nm wavelength of visible light refraction less transparency higher, whereas less transparent.
3, a heat stabilizer in PVC, "solubility", i.e., the compatibility of
Compatibility is two or more Chrolinated polyethylene substances refers to the affinity of each when mixed. Compatibility is good that it is possible to achieve molecular level dispersion. A thermal stabilizer in the molten state has good compatibility with PVC resin. Do not form a two-phase, which is not obvious interface or interface, refraction less, more transparent PVC products. Liquid stabilizer than the corresponding solid metal soaps in PVC compatibility, the length of the linear molecule and smaller, and thus the higher the transparency of the PVC. Free radical polymerization of vinyl chloride is polymerized random, in addition to its first stable - tail structure, and the first - the first structure - CH2-CHCl-CHCl-CH-, tail - tail structure-CHCl-CH2-CH2-CHCl -; vinyl Results generated with coupling disproportionation CH2 = CH-CHCl-CH2-, and allyl chloride structure-CH2-CH = CH-CHCl-CH2 and the like.
Generating allyl chloride, chlorine and PVC flame retardant tertiary carbon double bond in the synthesis of PVC is its molecular chain structure is unstable factors of instability order: PVC internal molecular chain allyl chloride> tertiary carbon chloro> allyl end groups chloride> Chung chlorine. It is easily degraded because of instability in the structure of PVC molecular chains exist, if not for stabilization when modified PVC processing, the decomposition temperature is about 130 ℃, but that the PVC resin processing into useful products, molding Acrylic impact modifier temperature to at 190 ℃ or more. Thus, heat stabilizers must be added to improve its structure is stabilized.
So pvc needs to be added during the synthesis PVC heat stabilizers.
2013年12月23日星期一
PVC impact modifier which species
PVC impact modifier and sometimes also from the plasticizing effect , it can also be seen as a plasticizer and an impact modifier for PVC resin are the following :
( A ) chlorinated polyethylene (CPE) using the product of HDPE powder was suspended in an aqueous phase chlorination , so as to increase the degree of chlorination of the original crystalline HDPE become amorphous elastomer. Used as a toughening agent C? E, typically containing 25-45 volume % C1 . CPE wide sources , low prices, in addition to a toughening effect , but also has a cold resistance, weather resistance , flame resistance , and chemical resistance . Currently in our country is dominated PVC window stabilizer by the CPE impact modifiers, especially in the production of PVC pipes and profiles , most factories use CPE. Amount is generally 5-15 copies. CPE can be used in conjunction with other toughening agents , such as rubber , EVA , etc. , the better , but the rubber additives intolerance aging.
(2) ACR methyl methacrylate , copolymers of acrylic acid ester monomer , ACR impact modifier is best developed in recent years , it can increase the impact strength of the material several times . ACR core-shell structure are an impact modifier , methyl methacrylate - ethyl acrylate composition of the shell polymer , the rubber elastic body segment to the crosslinked butyl acrylate is formed on the particle distribution of the inner core . In particular, impact modified for outdoor use PVC plastic products , PVC plastic window profiles using as an impact modifier ACR compared with other modifiers have good processing performance , smooth surface, anti-aging , high strength fillet features , but the price is more than CPE, high 1 /3. Common foreign brands such as K-355, the general amount of 6-10 parts . Current domestic production manufacturers ACR impact modifier fewer manufacturers use less.
(3) MBS is methyl methacrylate , and styrene- butadiene copolymer of the monomers . MBS solubility parameter between 94-9.5 , close to the solubility parameter of PVC , so when good compatibility with PVC , it 's most important feature: After joining PVC products can be made transparent . Usually the person added 10-17 parts of PVC , PVC can be 6-15 times the impact strength , but the amount more than 30 MBS phr , PVC impact strength decreased. MBS itself has good impact resistance, transparency, and Plastic impact modifier light transmittance of more than 90 %, and at the same time to improve the impact resistance of the resin other properties , such as tensile strength , elongation at break little effect . MBS higher price , often with other impact modifiers, such as EAV, CPE, SBS and the like used . MBS poor heat resistance , poor weather, do not suitable for long-term use of outdoor products, generally do not do plastic window profiles produced by the impact modifier . (4) SBS styrene , butadiene , styrene ternary block copolymer , also known as thermoplastic rubber, thermoplastic elastomers belonging to its structure can be divided into two kinds of star and linear . Ratio of styrene and butadiene SBS is mainly 30 /70, 40 /60 , 28 / 72 , 48/ 52 several. Mainly used as HDPE, PP, PS impact modifier in an amount 5-15 parts . SBS its main role is to improve the low temperature impact resistance. SBS poor weather, do not suitable for long-term use of outdoor products . (5) ABS styrene ( 40% -50 % ) , butadiene ( 25% -30 % ) , acrylonitrile ( 25% -30 % ) terpolymer used mainly plastics , are also used as PVC impact modified, low-temperature impact modifiers also very effective . When added in an amount of 50 parts of ABS , PVC and the impact strength can be quite pure ABS. ABS is generally added in an amount of 5-20 parts , ABS poor weather , suitable for long-term outdoor use products, generally do not processing aid do plastic window profiles produced by the impact modifier . (6) EVA is a copolymer of ethylene and vinyl acetate acid , vinyl acetate is introduced to change the crystallinity of polyethylene , vinyl acetate content of large difference , and the different refractive index EVA and PVC , transparent products is difficult to obtain , therefore , often the EVA resin and used with other impact . EVA added in an amount of 10 parts or less.
( A ) chlorinated polyethylene (CPE) using the product of HDPE powder was suspended in an aqueous phase chlorination , so as to increase the degree of chlorination of the original crystalline HDPE become amorphous elastomer. Used as a toughening agent C? E, typically containing 25-45 volume % C1 . CPE wide sources , low prices, in addition to a toughening effect , but also has a cold resistance, weather resistance , flame resistance , and chemical resistance . Currently in our country is dominated PVC window stabilizer by the CPE impact modifiers, especially in the production of PVC pipes and profiles , most factories use CPE. Amount is generally 5-15 copies. CPE can be used in conjunction with other toughening agents , such as rubber , EVA , etc. , the better , but the rubber additives intolerance aging.
(2) ACR methyl methacrylate , copolymers of acrylic acid ester monomer , ACR impact modifier is best developed in recent years , it can increase the impact strength of the material several times . ACR core-shell structure are an impact modifier , methyl methacrylate - ethyl acrylate composition of the shell polymer , the rubber elastic body segment to the crosslinked butyl acrylate is formed on the particle distribution of the inner core . In particular, impact modified for outdoor use PVC plastic products , PVC plastic window profiles using as an impact modifier ACR compared with other modifiers have good processing performance , smooth surface, anti-aging , high strength fillet features , but the price is more than CPE, high 1 /3. Common foreign brands such as K-355, the general amount of 6-10 parts . Current domestic production manufacturers ACR impact modifier fewer manufacturers use less.
(3) MBS is methyl methacrylate , and styrene- butadiene copolymer of the monomers . MBS solubility parameter between 94-9.5 , close to the solubility parameter of PVC , so when good compatibility with PVC , it 's most important feature: After joining PVC products can be made transparent . Usually the person added 10-17 parts of PVC , PVC can be 6-15 times the impact strength , but the amount more than 30 MBS phr , PVC impact strength decreased. MBS itself has good impact resistance, transparency, and Plastic impact modifier light transmittance of more than 90 %, and at the same time to improve the impact resistance of the resin other properties , such as tensile strength , elongation at break little effect . MBS higher price , often with other impact modifiers, such as EAV, CPE, SBS and the like used . MBS poor heat resistance , poor weather, do not suitable for long-term use of outdoor products, generally do not do plastic window profiles produced by the impact modifier . (4) SBS styrene , butadiene , styrene ternary block copolymer , also known as thermoplastic rubber, thermoplastic elastomers belonging to its structure can be divided into two kinds of star and linear . Ratio of styrene and butadiene SBS is mainly 30 /70, 40 /60 , 28 / 72 , 48/ 52 several. Mainly used as HDPE, PP, PS impact modifier in an amount 5-15 parts . SBS its main role is to improve the low temperature impact resistance. SBS poor weather, do not suitable for long-term use of outdoor products . (5) ABS styrene ( 40% -50 % ) , butadiene ( 25% -30 % ) , acrylonitrile ( 25% -30 % ) terpolymer used mainly plastics , are also used as PVC impact modified, low-temperature impact modifiers also very effective . When added in an amount of 50 parts of ABS , PVC and the impact strength can be quite pure ABS. ABS is generally added in an amount of 5-20 parts , ABS poor weather , suitable for long-term outdoor use products, generally do not processing aid do plastic window profiles produced by the impact modifier . (6) EVA is a copolymer of ethylene and vinyl acetate acid , vinyl acetate is introduced to change the crystallinity of polyethylene , vinyl acetate content of large difference , and the different refractive index EVA and PVC , transparent products is difficult to obtain , therefore , often the EVA resin and used with other impact . EVA added in an amount of 10 parts or less.
2013年12月22日星期日
Polyvinyl chloride (PVC) profiles analyzed factors discoloration
Polyvinyl chloride (PVC) profiles influencing factors analysis discoloration discoloration PVC profile extrusion profiles should include the processing, storage and use of the process of aging discoloration ( yellow, dimmed , etc. ) as well as the gloss disappears after aging profiles and chalking phenomenon ( white profiles ) . Which refers to the white profiles are bright and shiny with a product , gloss white powder disappeared and is still a discoloration profile profiles . The color depends on the PVC profile joint action of external and internal conditions. Which external conditions , including UV irradiation , certain temperature, humidity and PVC stabilizer oxygen conditions , air pollution ( dust , sulfur , acid rain , etc. ) ; and internal conditions are PVC degradation HCl molecule itself off . This paper analyzes the impact of external climatic conditions on PVC degradation of color in the start, from the recipe sections discuss heat stabilizers, pigments such as titanium dioxide , and other effects on PVC profile discoloration and the controlling factors. So as to analyze the problem and prevent discoloration of PVC profiles , and provide a theoretical basis for the development of high-end PVC profiles . An external factor profiles discolored 1.1 ultraviolet irradiation
Extraterrestrial solar radiation to a continuous air layer is light spectrum , the wavelength range of 0.7-3000nm, wherein the radiation portion of the 300-400nm UV degradation is mainly caused by the polymer . Energy in the range of 290 ~ 400nm ultraviolet photons is 419 ~ 297kJ / E, the polymer was significantly higher than the bond energy of typical bond . Of course, regional ultraviolet irradiation intensity at different latitudes on Earth is not the same , which determines the different parts of the durability of PVC profiles require different formulations . 1.2 Temperature and humidity
In addition to UV radiation , should aluminium stearate also consider the effects of temperature , humidity and regional climate. As the temperature rises, thermal degradation and photodegradation may overlap, even dominant. This is mainly due to the profile of the infrared absorption of solar light into heat , so that the surface temperature can be high students , can accelerate aging discoloration .
Moisture in the air (humidity ) is one cause of degradation of the PVC . Water can be extracted , and photochemical reactions involved in the hydrolysis of certain pigments or titanium dioxide which affects the PVC degradation. In addition, since the outdoor temperature , condensing moisture in the air condenses on the surface of the profile , wherein the composition contains the oxygen , thereby becoming oxidized water can accelerate the degradation of the polymer . 1.3 Air Pollution
Aging caused by radiation plastic , i.e., the radiation reaches the earth's surface by the direct light of the sun ( " solar radiation" ) and light scattering ( " sky radiation" ) composed of two parts , is inversely proportional to the fourth power of the wavelength of the light scattering power ( Swiss 's law ) . Airborne particles ( dust ) can cause the scattering of sunlight , which means that short-wave scattering wavelength easier to reach the ground. Thus , the particles suspended in the air that reaches the surface of the ultraviolet light may be PVC stabilizer enhanced to accelerate the degradation of PVC . Sulfur pollution response lead stabilizers for PVC profile system, a relatively high sulfur content in the air conditions , lead stabilizers may occur to generate colored PbS ( black ) . When the profiles are acid rain , in the strong sunlight, acid rain, the remnants of the surface profile generation "HS-" ions , which ions can be dissolved in water and the presence of Pb2 + profile role , can also form precipitates leaving the surface profile generate colored " cure " pollution phenomenon .
Extraterrestrial solar radiation to a continuous air layer is light spectrum , the wavelength range of 0.7-3000nm, wherein the radiation portion of the 300-400nm UV degradation is mainly caused by the polymer . Energy in the range of 290 ~ 400nm ultraviolet photons is 419 ~ 297kJ / E, the polymer was significantly higher than the bond energy of typical bond . Of course, regional ultraviolet irradiation intensity at different latitudes on Earth is not the same , which determines the different parts of the durability of PVC profiles require different formulations . 1.2 Temperature and humidity
In addition to UV radiation , should aluminium stearate also consider the effects of temperature , humidity and regional climate. As the temperature rises, thermal degradation and photodegradation may overlap, even dominant. This is mainly due to the profile of the infrared absorption of solar light into heat , so that the surface temperature can be high students , can accelerate aging discoloration .
Moisture in the air (humidity ) is one cause of degradation of the PVC . Water can be extracted , and photochemical reactions involved in the hydrolysis of certain pigments or titanium dioxide which affects the PVC degradation. In addition, since the outdoor temperature , condensing moisture in the air condenses on the surface of the profile , wherein the composition contains the oxygen , thereby becoming oxidized water can accelerate the degradation of the polymer . 1.3 Air Pollution
Aging caused by radiation plastic , i.e., the radiation reaches the earth's surface by the direct light of the sun ( " solar radiation" ) and light scattering ( " sky radiation" ) composed of two parts , is inversely proportional to the fourth power of the wavelength of the light scattering power ( Swiss 's law ) . Airborne particles ( dust ) can cause the scattering of sunlight , which means that short-wave scattering wavelength easier to reach the ground. Thus , the particles suspended in the air that reaches the surface of the ultraviolet light may be PVC stabilizer enhanced to accelerate the degradation of PVC . Sulfur pollution response lead stabilizers for PVC profile system, a relatively high sulfur content in the air conditions , lead stabilizers may occur to generate colored PbS ( black ) . When the profiles are acid rain , in the strong sunlight, acid rain, the remnants of the surface profile generation "HS-" ions , which ions can be dissolved in water and the presence of Pb2 + profile role , can also form precipitates leaving the surface profile generate colored " cure " pollution phenomenon .
2013年12月18日星期三
By type and mechanism of PVC heat stabilizers brief
Type of plastic heat stabilizer is a kind of heat stabilizers can prevent or reduce the polymer is heated in the course of processing and degradation or cross-linking additives to extend the life of the composite material. Usual stabilizers can be divided into categories according to the main component of salt, fatty acid soaps, organotin compounds, heat stabilizers, and the pure compound classes of organic compounds.
Heat stabilizers salt: salt stabilizer is the combination of the "base" of lead salts of inorganic acrylic processing and organic acids, such stabilizer having excellent heat resistance, weather resistance and electrical insulating properties, low cost, transparent poor, there is a certain toxicity, dosage is generally 0.5% to 5.0%. Fatty acid based heat stabilizer: Such a thermal stabilizer is a compound consisting of a fatty acid with magnesium hydroxide a metal ion root, also known as hot metal soap stabilizers, its performance and the kind of metal ions and acid radicals, generally in an amount of 0.1% to 3.0 %.
Composite heat stabilizer: Such a thermal stabilizer is a metal salt or soap as a kind of liquid or solid based and organic tin compound-based compound, wherein the metal salts are calcium - magnesium - zinc, barium - calcium - zinc, barium - zinc and barium - cadmium; common organic acids such as organic acids, naphthenic acid, oleic acid, benzoic acid and salicylic acid.
Organic heat stabilizers: Except for a few of such primary heat stabilizer stabilizer may be used alone (primarily nitrogen containing organic compound), but also a high boiling point include polyhydric alcohols and phosphites, phosphates and metal stabilizers often and with agents that can improve weather resistance, transparency of the composite material, to improve the surface color of the article. Mechanism of pvc heat stabilizers and absorption HCL, inhibit autocatalysis. Such stabilizers include lead salts, organic acid metal soaps, organic tin compounds, epoxy compounds, phenol salts and metal thiolate. They can react with HCL, HCL off PVC suppression response. PVC substitution labile allylic chlorine in the molecule atom suppression de PVC. Organotin stabilizers such as ligand binding molecules and instability occurs PVC chlorine atom, a ligand, a chlorine atom with an unstable organotin substitution. An addition reaction with the polyene structure, the formation of large conjugated system damage and reduce coloration. Unsaturated acid salts or esters containing double bonds, and the PVC molecules conjugated diene double bond addition reaction, thereby destroying the structure of the conjugate, inhibiting discoloration.
Capturing free radicals and prevent the oxidation reaction. As the phenolic heat stabilizer can be added to titanium dioxide block off the HCL, because phenol can be given by H atoms and radical degradation of PVC macromolecular radical coupling, not react with O2 forming material, and a heat stabilizing effect. Such a thermal stabilizer, one or both may have several roles. Ideal for PVC heat stabilizers should be a versatile substance, or a mixture of some of the material, they are able to perform the following functions: First, replacement lively, unstable substituents; second is to absorb and neutralize the release of PVC processing HCL, eliminating autocatalytic degradation of HCL; Third neutralize or inactivate catalytic degradation of metal ions and other harmful impurities; Fourth, through various forms of chemical reactions can be blocked unsaturated bond continues to grow, inhibiting degradation coloring; five is the best shield against ultraviolet protective effect. Generally, heat stabilizers according to their performance with the use of special, very little is used alone, but most of the species in a powder form, some of which are highly toxic chemicals. For ease of use, to prevent dust poisoning, reduce toxic substances or substitute non-toxic substances, at home and abroad in recent years developed a wide variety of composite stabilizer, for example, the world famous German brand composite stabilizer Bear series, the United States, Germany, Japan, Netherlands and other countries, or organotin compound organotin stabilizers have a considerable market in China. Therefore, the development of China's efforts to promote the use of high efficiency, low cost, no dust pollution and toxic or low toxicity of new composite stabilizer is an urgent need for the development of China's plastics industry.
订阅:
博文 (Atom)