PVC plasticizer

PVC plasticizer

2013年8月29日星期四

plastic external lubricants in the application of other plastic

Polyamide in the application:
Plastic and external lubricants , such reinforcements and uniform distribution of the pigment in the polyamide . Usual dose is 0.2-0.5% . In injection molding polyamide , ease of demolding and lubricants depending on the effect of crystallinity , as they improve flow properties and  vegetable stearic acid release properties , and thus very suitable for molding , injection molding and temperature make it possible to save time .
Thermosetting plastics in the application:
Thermosetting plastics in the acrylic processing  production and processing to a lubricant and release agent . These products must be accurate and consistent with each other . Use a compatible lubricants can improve mobility , the outer material and the lubricant can reduce the adhesion of the hot parts of the machine , thus improving the release effect . Plastics and external lubricants to a very strong effect and internal mold release lubricant combined to provide a greater allowable operating range . They are neither the product nor plasticized migration .
Application of the iron oxide yellow  thermoplastic polyurethane : Thermoplastic polyurethane (TPU) at just after processing is very viscous . Results Injection difficult stripping and stacking adhesions. Use plastic external lubricants can give a very good release effect and will not migrate .

lubricants and lubrication is currently no real sense of theories and laws

Right - like PVC-U formulation design , the author believes that the difficulties formulation and the main contents of the inner and outer lubricant selection of species and their proportions and adding the total design. Lubricant to the total amount should be suitable , and PVC stabilizer for cable  internal and external lubricant ratio is more important , even though the total amount sufficient , but if imbalance, nor co- continuous production of qualified products.
However, for the processing of PVC-U critical lubrication system , in theory there is no known theory , and even formulation can effectively guide the experimental law no . The  magnesium stearate only rule is to learn from the so-called general chemistry , " like dissolves like " rule, which is the lubricant of PVC resin polarity polarity more similar to its compatibility with the more evil , and thus its role within the lubrication better ; against outside lubrication is strong, but this rule for guiding formulation also very limited. Because the polarity judgment lubricant is a lubricant according to the chemical structure, that the lubricant molecules containing hydroxyl groups , ester groups, carboxyl groups , amide group and  epoxidized soybean oil an ether group , a ketone group such as a polar functional group species , quantity and with a long alkyl ratio. As the lubricant chemical structure complex, diverse , and the interaction between adjacent functional groups , such that the polarity of the lubricant is more difficult to determine the size , which resulted in a polar lubricant alone to infer lubricant and lubrication lubricant is actually played by the difference between the lubrication is far beyond people's imagination .

2013年8月28日星期三

Supply of PVC impact modifier

 Second, the main performance:
1, can be used as a polymeric plasticizer , and in the long-term use will not migrate to the product surface precipitation .
2, low temperature performance blends , polarity, anti-UV, anti- chemical and microbiological corrosion performance improved significantly .
3 , added to the PVC, ABS or PVC / ABS alloy to improve its thermal stability.
4 , the European regulatory approval for food contact industry .
5, in the PVC processing , Elvaloy ® 4924 can significantly improve the impact properties, including low-temperature impact resistance .
Third, the  plastic flame retardant theoretical basis and the impact modifier advantage
PVC low-temperature impact strength are the main reasons is because a strong PVC molecules caused by intermolecular forces , because PVC strong molecular attraction between molecules makes PVC products subjected to external shock , PVC molecules difficult to produce the relative displacement , so that the impact energy can not be effectively converted to internal frictional heat , resulting in rupture of the material . Adding a plasticizer , CPE PVC because reducing the attraction between the molecules leaving the improved impact strength , but low molecular weight organic plasticizers are added when less easy to precipitate , and an anti- volatile plasticizing effect instead, the material becomes brittle and will greatly reduce the use of a large number of mechanical properties , it is difficult to use in hard products . The CPE of the polymer precipitated polymer although there is no problem , because its glass transition temperature above -10 ℃ , so the  iron oxide black low temperature impact performance is not ideal. DuPont Elvaloy 4924 is an ethylene - vinyl acetate carbonyl (E / VA / CO) copolymer , molecular weight PVC rather , is a permanent plasticizer , not precipitated , anti-migration , can significantly reduce the intermolecular force PVC , the glass transition temperature - 36 ℃, to overcome the low glass transition temperature and the CPE plasticizers easy to produce anti- plasticization defects. Not only can greatly improve the impact properties of rigid PVC and can effectively improve the weathering resistance.
Fourth, technical indicators:
Melt index (g/10min) 9
Density (g/cm3) 1.03
Tensile Strength (Psi) 1580
Elongation at break ( % ) 736
Glass transition temperature (℃) -36
Melting point (℃) 70
Solubility parameter 8.68
Five , the main application
1 , rigid PVC: improved formability , reduce subsequent vacuum forming temperature , forming speed faster , improve impact resistance ;
2, soft PVC: to increase weather resistance , low temperature resistance , chemical resistance and no -shift problems and Diethylene glycol dibenzoate  improve impact resistance
3 , Footwear: with rubber handle, can increase wear and slip effect , against the soapy water and oil also increased many aspects of behavior .
4 , Other : PVC cable , PVC film, PVC leather and PVC and rubber blend products.

impact modifier and processing modifier

Impact modifiers and processing modifier
( A ) impact modifiers and processing modifier function
1 , the performance of impact modifier
To improve the impact properties of plastic additives added for the purpose referred to as impact modifier . These additives can not only improve the impact strength of the resin , but  magnesium stearate also to improve the processability of the resin . Impact modifier is typically used in rigid PVC , but in polypropylene, polystyrene and modified plastics has universal application. Currently , rigid PVC impact modifier used mainly some copolymer resin or a modified resin such as ABS, MBS, EVA, CPE , and thermoplastic rubber , thermoplastic elastomers , which are widely used as PVC, PE, PP, PS, AS, ABS, PMMA, PA, PC, PBT, PET and so on. Impact modifier may be added into a ductile plastic brittle plastics can be applied only in the normal temperature of the plastic into a plastic used at low temperatures , in addition , can effectively improve the processing properties of plastics .
Ideal resistance modifier should have the following properties:
① and modification of the substrate must have a good compatibility.
② modifier particle size, morphology medium a diameter of about 200nm is appropriate to protect the effect is a high impact strength .
③ modifier to lower the glass transition temperature is preferred.
④ impact modifier preferably has slightly crosslinked to improve the reinforcing effect .
⑤ modifier processing properties of the resin without prejudice to its apparent performance and physical and mechanical properties without adverse effects.
⑥ requires non-toxic, non-polluting and affordable.
2 , the processing performance modifier
Processing modifier for plastic processing performance is poor and development of a class of additives that are added to improve the polymer in the molten resin flow , and a thermal stability, heat distortion resistance and surface gloss of the material products . Currently, the processing modifier is mainly to improve the melt viscosity of PVC , improved flowability and processability.
Processing modifier primarily polymer, the application is more acrylic copolymer , such as methyl methacrylate / acrylic acid copolymer system (MMA / FA system ) , methyl methacrylate / butyl methacrylate acrylate / ethyl acrylate / methyl methacrylate copolymer systems (MMA / BMA / EA / EMA system ) , methyl methacrylate / ethyl acrylate / acrylonitrile copolymer system (MMA / EA / AN system ), etc. The amount of resin added is usually from 3% to 8%.
( Two ) impact modifiers and processing modifier classification and species
1 , impact modifiers and species classification
① acrylonitrile - butadiene - styrene copolymer (ABS): ABS resin is a graft copolymer of polybutadiene latex is added to the styrene and acrylonitrile monomers copolymerized . Impact modifier for PVC, ABS has a good effect, the toughening effect, while the tensile strength and elongation decrease is small, the general amount of 10% to 20%. ABS resin due to the presence of unsaturated structures , weather is poor, so products should not be long-term outdoor use . ABS resin is less than the compatibility with PVC, MBS, the product transparency is not as good MBS copolymer ; such as a transparent ABS and PVC blends can obtain a transparent products. When the ABS dosage of 20% to 30 %, the impact strength with excellent results.
② methyl methacrylate - butadiene - styrene copolymer (MBS): MBS is to polybutadiene or butadiene - styrene emulsion , methyl methacrylate graft copolymerized . Adding MBS resin can improve the impact toughness of PVC , polyvinyl chloride increase the transparency , but poor aging resistance of MBS , MBS higher rubber content , the higher the impact toughness . MBS added amount is generally 10% to 17 % is appropriate, more than 30 % of the brittle failure occurs .
③ chlorinated polyethylene (CPE): chlorinated polyethylene of high density polyethylene (HDPE) chlorination , chlorine content is generally 30% to 45% , depending on the resin component , the PVC flame retardant  chlorine content , the molecular structure and morphology different , showing a rigid plastic from the rubber elastic body in different state changes. Molecular weight of 1,000,000 or more CPE is not only good impact resistance , and excellent weather resistance , ABS and MBS overcome the shortcomings of poor weather . In addition , CPE chlorine in a great effect on the size of the modified , low chlorine content , its high crystallinity and poor toughness , high glass transition temperature , poor compatibility with PVC . Chlorine content is too high , CPE 's cohesion is stronger , but relatively poor dispersion . CPE in PVC dosage is generally 5% to 15%. CPE, cold resistance, chemical stability , flame resistance, oil resistance and electrical insulating properties are good .
④ ethylene - vinyl acetate copolymer (EVA): EVA used as modifiers of PVC , the vinyl acetate content should be more than 40 ¥ . EVA good weather resistance, modified PVC products can be used outdoors, but the transparency and tensile strength have declined. The addition of EVA is generally 5% ~ 10%, EVA as the modifier , also be used in the modified polyolefins , to improve weatherability , cold resistance .
⑤ styrene - butadiene = styrene copolymer (SBS): used mainly to change HIPS, PP, PS toughening , cold and impact strength . Added amount is generally 5 % to 10 %, can greatly improve the low temperature impact toughness .
⑥ synthetic rubber and thermoplastic elastomer impact modifier : synthetic rubber and thermoplastic elastomers have excellent toughness, flexibility , high elasticity and excellent low temperature performance, itself has good impact resistance , good impact resistance is changed Xing agent.
POE is an ethylene / octene copolymers, as PE, PP, PA impact modifier to good effect in toughening the same time, to lower rigidity .
EPDM rubber (EPDM), has good flexibility, elasticity , tear resistance , acid and alkali , weather resistance and impact resistance.
From ethylene , propylene copolymer made of ethylene propylene rubber (EPR), an amorphous rubber, has good impact properties.
Nitrile rubber (NBR), generally used in acrylonitrile content of 26 % to 32 % of impact modifier .
Others include styrene-butadiene rubber , butadiene rubber , chloroprene rubber, butadiene rubber , etc., can be used as impact modifiers , General addition of 10% to 20%. Currently there are more commonly used ethylene-propylene rubber and nitrile rubber, for the modification of PVC, PP, HIPS, PS and other thermoplastic resins.
2 , processing modifier classification and species
① ACR: ACR is methyl methacrylate and acrylic acid ester copolymer. ACR has a core / shell structure of the polymers. Is a crosslinked butyl acrylate (BA) rubber-like polymer as the core and poly (methyl methacrylate) (PMMA) as the shell , the outer shell of his good compatibility with PVC, PMMA , and its inner layer of mild crosslinked core, the core and the shell or by a concentration gradient method of controlling with other polymers gradual transition , a transition layer is formed , so that the shell core and the compatibility is improved, which greatly improves the impact resistance results. It is not only the PVC processing modifier , impact modifier is a thermoplastic polyolefins and coupling agents . ACR models are more varieties .
ACR-201: white powder, the relative density of 1.05 to 1.20 , the particle size of 98 % passing 30 mesh . And close to the solubility parameter of PVC , it has good compatibility and moldability . As the PVC processing modifier generally ACR was 1% to 3%.
ACR-401: Appearance white powder, is methyl methacrylate, ethyl acrylate, butyl acrylate , styrene monomer is copolymerized four kinds . The molecular structure of the core-shell structure, molecular weight of 250,000 ~ 750,000 . Intrinsic viscosity of 0.5 to 1 Fineness 98% passed through a 40 mesh , the glass transition temperature of 54 ℃, the thermal decomposition temperature of 268 ℃, insoluble in water, soluble in acetone , methyl ethyl ketone . Non-toxic fire retardant.
Due to the crosslinked butyl acrylate rubber elastic body is formed as a shell structure , and therefore have good processing flowability and impact toughness.
② P-83: P-83 full name CHEMIGUM-P83, which is copolymer of butadiene and acrylonitrile , i.e., a new type of powdered nitrile rubber , a loose powder , has a special three-dimensional structure . Which is characterized by good compatibility with PVC , PVC overall improvement in performance. Improved processability , thermal stability , low temperature resistance , abrasion resistance , flexibility and the like .
And P-83 similar processing aids are: Canadian production KPYNAC-1122 and DuPont ELVALOY-741, 742 , etc.
③ poly- α- methylstyrene : the α- methylstyrene oligomer . Also known as AMS or R-18. Phenol and acetone production by-product , but also by cumene dehydrogenation. AMS molecular weight of 300 to 350 is liquid ; molecular weight of 700 to 1000 , known as M-80 resin , is brittle solid , a softening point of 93 ~ 105 ℃. AMS except for PVC , but also for the PU, PS, ABS and CPE and other cold weather processing modifier .
④ 820-G: is a chlorinated paraffin and polypropylene oxide - ethylene made ​​by free radical grafting of flame retardant  a surfactant , and a silane coupling agent after the chlorine composed of surface-treated carrier . Can significantly improve the processability of rigid PVC , and when adding 10 % to 15 %, the impact strength can be improved and increased surface gloss , replace part of ACR, that the products costs.
⑤ NPA: a polyolefin resin, a fluorine-containing resin , silicone , waxes and other preparation . NPA-6, NPA-8 is a linear low density polyethylene processing aids , the appearance of a white powder , melting at 105 ~ 110 ℃, molecular weight of 1,000 to 1,500 , a melt index of 50 ~ 55g/10min. NPA has a smoothness and processing mobility. Added amount is generally from 2% to 4%.
⑥ Many of the impact modifier MBS, ABS, CPE, EVA, SBS such as impact modifier , is processing modifier .

2013年8月27日星期二

plasticizer chemical classification

(1) acid esters (including phthalic, terephthalic, isophthalic acid esters).
(2) aliphatic dibasic acid esters (including adipic acid esters, azelaic acid esters, sebacic acid esters).
(3) phosphate esters antimony oxide  (including phosphoric acid fatty alcohol esters, phosphoric esters and chlorinated phenol phosphate).
(4) a polyol ester (include glycerol triacetate, diethylene glycol benzoate, etc.).
(5) benzene multi esters (including trimellitic acid, trioctyl trimellitate three hexyl, pyromellitic acid tetraethyl ester).
(6) Citric acid Glycerol monostearate  esters [including triethyl citrate, acetyl triethyl citrate, tributyl citrate, acetyl tributyl citrate (2 - ethylhexyl) ester, etc.].
(7) polyesters (including propylene glycol polyester of adipic acid, sebacic acid, propylene glycol polyester, phthalic acid polyester, etc.).
(8) epoxy (including epoxidized soybean oil, epoxidized linseed oil, epoxidized butyl oleate, octyl epoxy stearate, epoxidized triglycerides, propylene tetrahydro phthalic octyl, etc.).
(9) a chlorine-based (including paraffin, pentachlorophenol methyl stearate).
(10) a reactive plasticizer (including maleic acid, butyl maleate, octyl acrylate, acrylic acid / methacrylic acid polyhydric alcohol  zinc borate esters, fumaric acid esters, itaconic acid esters, unsaturated polyester resin, etc.).

Plasticizer

 Plasticizers (English: Plasticizer), also known as a plasticizer, a plasticizer, an increase in softness of the material or liquefied additive material. Add object contains plastic, concrete, drywall materials, cement and gypsum and so on. The same kind of plasticizing agent often used in different objects, but its effect is often not the impact modifier  same. Plasticizer range up to hundreds of kinds, but the most commonly used means one group of compounds known as phthalates. According to statistics, in 2004 the world's plasticizing agent market, totaled about 550 million tons and 6,000,000 tons moving toward. Add a plasticizer based plastics used functions in different environments, manufactured with a variety of toughness and softness, gloss finished, which required more soft plastic products the more plasticizer added. General often use plastic wrap, one is without additives PE (polyethylene) material, but its viscosity is poor; Another widely used is PVC (polyvinyl chloride) plastic wrap, a large number of plasticizers to make PVC material becomes soft and increases viscosity, very suitable for fresh food packaging. Use concrete plasticizer (superplasticizer), can increase the workability of the low molecular polyethylene  mixture is not easy to produce cellular facilitate construction, thereby reducing the water content ratio, increase the intensity. The wall material can be increased by adding a mixture of plasticizers liquefaction degree, so they do not add too much water, can reduce the time required for drying the wall. Basic types of internal plasticizer
Internal plasticizer is actually part of the polymer. Plasticizers are generally within the polymer during the polymerization of the second monomer introduced. Since the second monomer in the polymer molecular structure, reducing the polymer molecule chains are isotactic, which reduces the crystallinity of the polymer chain. Such as vinyl chloride - vinyl acetate copolymer softer than vinyl chloride homopolymer. The use of plasticizers within the temperature range is relatively narrow, and must be added during the polymerization, so use less internal plasticizer. External plasticizer
External plasticizer is a low molecular weight compounds or polymers, it is required to add the  carbon black polymer plasticized, increase the plasticity of polymers. External plasticizer is generally a high boiling point of less volatile liquid or low melting point solids, and the vast majority of organic compounds are esters. Usually they do not react with the polymer, and the interaction of the polymer mainly in the swelling action of elevated temperatures, with the polymer to form a solid solution. External plasticizers production and a more comprehensive and easy to use, very wide application. Now people are referring to the general said plasticizer external plasticizer. Dioctyl phthalate (DOP) and dibutyl phthalate (DBP) are outside the plasticizer

2013年8月26日星期一

plasticizer cause male infertility


  Plasticizer is causing male infertility: Phthalates are a class of plastics used in the main plasticizer and  PVC processing aid flexible agent, because all kinds of plastic packaging fast food appeared in large numbers, making contact with people on the plasticizer opportunities have increased significantly. After 10 years of research found that phthalates in plastics plasticizer may be the cause behind male infertility. In animal experiments, we gave mice fed plasticizers and found decreased testis weight, smaller size, and degenerative changes in testes appeared decreased sperm count, sperm deformity rate increased. In certain doses, associated with the heat stabilizer for pipe  two kinds of plasticizers used in mouse bone marrow micronucleus and sperm abnormality test results were positive. This shows that the plasticizer is a heritable cause chromosomal aberrations cleavage agent. Plasticizers body excretory phase current is not clear if the daily intake, it is easy to accumulate in the body, resulting in toxic effects. In order to reduce the exposure of childbearing age youth plasticizer, we recommend that antimony flame retardant  young people of childbearing age to take the following self-protection measures: ① eat instant food in plastic packaging. ② not directly heated plastic packaged foods (such as bags of milk). ③ not in plastic food storage container and heated in a microwave. ④ without plastic bags placed hot fritters, cakes, Gao, hemp groups, and other fried fried foods. ⑤ the roadside food vendors to provide colorful small plastic bag shut. ⑥ strict implementation of 1 June 2008 China began to implement the plastic limit. This is not only beneficial to protect the environment, maintain the ecological balance, and help reduce the health hazards of plasticizers, especially for childbearing potential threat to the male reproductive capacity.