PVC plasticizer

PVC plasticizer
显示标签为“zinc borate”的博文。显示所有博文
显示标签为“zinc borate”的博文。显示所有博文

2014年3月11日星期二

PVC lubricant developed rapidly

With the rapid development of industrial technology , foreign to all kinds of hard PVC products as raw materials ( such as tubes, sheets, plates , profiles , etc. ) have been developed rapidly , and these WSD Titanium dioxide rutile  different hardware products due to different processing equipment and technology needs , whether it is the lubricant for PVC from the variety and quantity requirements are made ​​more so , this demand will continue to promote the development and production of lubricant products.
Pvc Pvc products in the lubricant as a vital aid, it is compatible with PVC resin is very good , often mixed with resins, reduce WSD stearic acid  the melt viscosity of the resin to improve its liquidity. Such as butyl stearate , lead stearate lubricant is often used within pvc. Wherein the lubricant is stearic acid salts as well , and are effective stabilizers, and therefore play an essential role in the production process of pvc products . The plastics industry professionals also said that according to the PVC lubricant compatibility with PVC resin by other additives ( especially by other lubricants ) and change impact of the  WSD Chlorinated paraffin phenomenon and the different materials, PVC products must have an appropriate plasticizing degree raised this important guide and external lubrication balance. Pvc internal and external lubricant in the direction of future development , and according to this guidance for the design and production of PVC lubricant inside and outside work . In order to better assist the lubricant pvc products ( especially hard pvc products ) in the production process , thus ensuring a smooth and efficient production .

2014年3月3日星期一

Introduce some PVC flame retardant technology

Generated a lot of smoke when burning machine toxic gas , people poisoning, serious cause great harm to the human body . The flammability of plastic products bring to our lives a great security risk, therefore , the development of a class of flame retardant products that WSD PVC flame retardant  can be added to plastic products , play a retardant effect is the vast number of plastic products manufacturers and people requirements. Environment and conditions for combustion , flame retardant products are appropriate to develop it. Our analysis is the first element of the combustion heat, oxygen and fuel. Flame through endothermic effect, covering the role of several chain reaction mechanism , the role of non-combustible gases , such as suffocation inhibition play retardant effect.
For certain requirements added flame retardants used , without compromising the physical properties of plastics. With weather resistance , durability , and even lower prices , so as to use a wide range . 1 , so that combustibles charring flame retardant , flame retardant to achieve the effect . This flame-retardant effect is mainly play a role in the  WSD Chrolinated polyethylene solid phase , flame retardant materials in this category are mainly phosphorus-based flame retardant ( including organic and inorganic phosphorus- phosphorus-based ) .
2 , flame retardants to form non-volatile diaphragm under fire conditions , isolated from the air to reach retardant purposes. This flame-retardant effect is mainly play a role in the liquid phase. Retardant materials in this category are mainly borates, halides, phosphorus , and antimony oxide -based material , or to reflect each of these types of substances generated between the materials .
3 , the hydroxyl radical decomposition  WSD Aluminum hydroxide products retardant chain reaction
Flame should be cut so as to achieve the purpose . This flame-retardant effect is mainly play a role in the gas phase. This type of material is mainly play a role in the gas phase. Such fire-retardant material is mainly halide and antimony trioxide.

2014年3月2日星期日

Some major upgrade of the performance of PVC lubricant

Efficient and environmentally friendly non-toxic polymer composite lubrication is Jianhong lubricant formulations plant the introduction of international advanced technology and processes , using  WSD PVC stabilizer imported raw materials and foreign PVC plastic manufacturing process and material properties , polymer developed excellent internal and external lubricant. Overcome the lack of trouble and slip agents processing performance on the traditional monomer . Add this product safe to use, easy to mix , more stable performance , reasonable adjustment formula in the case , has the following remarkable properties: 1 , reducing the coefficient of friction between molecules and promote plasticizing , stable and appropriate to reduce the amount of system products ; has good off film effects , enhance surface finish and scratch resistance ; 2 wide melting range of this product , significantly improved PVC material processing flow freely and not sticky , thus  WSD Aluminum hydroxide increase productivity , reduce equipment wear and energy consumption, reduce the rate of non-performing products ; 3 , significantly improved fillers , pigments and other additives in the PVC dispersion resin , may be a corresponding increase in the amount of filler , and to products, color stability, gloss increases ; 4, the product in the processing of PVC both in front of and outside the latter lubrication within the recommended dosage is not blooming , no precipitation , with good  WSD PVC flame retardant stability. Efficient and environmentally friendly non-toxic polymer composite lubrication P-80A Scope: nontoxic polymer composite efficient lubrication P-80A is widely used in non-transparent sheet, plate , wire and cable , pipe fittings , profiles and other furniture edge banding class PVC products.

2014年2月21日星期五

Metallic stearate and stearic use production methods

Stearate, stearic acid, the scientific name, also known as stearic acid, white or creamy-white powder or crystalline lumps, which has a cross-section of microstrip shiny fine needle-like crystals; similar  WSD Aluminum hydroxide grease micro odorless, tasteless .
The main industrial oils produced by hydrolysis. After the current domestic sources of stearic basically been to import palm oil by catalytic hydrogenation, hydrolysis during high pressure, fatty acids off the light, and then vacuum distillation system.
Mainly for the production of stearic acid salts, for example: calcium stearate, lead stearate, magnesium stearate, iron base.
  The company set the development, production, sales WSD Plastic impact modifier  and service PVC composite stabilizer, stearic acid salts as a whole, the main products are calcium stearate, aluminum stearate, zinc stearate, potassium stearate, stearic acid lead, ammonium stearate, sodium stearate, magnesium stearate, cadmium stearate, barium stearate, iron stearate product.

2014年2月17日星期一

Application of the principles of heat stabilizer for shoes and some of the main content

The main stabilizer mixture according to tin, lead and the metal of group A, such as blood, barium, copper, zinc classification. Tin stabilizers: 1 or 2 comprising a tin-carbon bond, oxygen or sulfur as  WSD one pack stabilizer the remaining valence bond - tin bond unsaturated anionic tetravalent tin compounds are the most effective stabilizers for PVC. These organic tin compounds are tin oxide or an organic product with the appropriate acid chloride or ester reactions. Synergistic stabilizer mixture are common, typically include various organotin compounds and stream-based wavelet salt (compound) and the auxiliary additives, such as zinc soaps, phosphites, epoxides, esters, ultraviolet absorber, antioxidant agent. Obviously, most of the synergistic composition has a special, and therefore they have not yet WSD PVC lubricants  found fully common. Organotin stabilizers are divided into two types of sulfur and sulfur-free. Sulfur-containing stabilizers are all stable, excellent performance, but the presence of sulfur compounds similar to the taste and cross contamination problems station. Lead salt stabilizer compound, lead oxide content greater than 50%, compared with the conventional stabilizing agents, can reduce the amount of 10% to 30%, with a high efficiency and stability, and without grinding, directly into a kneading pot used for cable material, not only excellent in dispersibility, but also to maintain good  WSD zinc stearate electrical and mechanical properties of PVC. The organic / inorganic composite heat stabilizer S Series microcrystalline tribasic lead sulfate, the product of the reaction crystallization process, the original long needle becomes microcrystalline, thus greatly improving stabilizers in PVC resin dispersion and thermal stability. Low lead compound stabilizer KD series, with outstanding thermal stability

2014年1月20日星期一

Some of the major components of plastic lubricant

We are not a pure plastic material generally used , which is made ​​of material prepared by a number . Wherein the polymer (or synthetic resin ) is the main component of plastic, in addition , in order to improve the performance of plastics , but also add a variety of auxiliary materials such as fillers , plasticizers , lubricants , stabilizers in the polymer, coloring agents , in order to become a good performance plastics.
A synthetic resin, synthetic resin is a main component of plastic, the plastic content is generally 40% to 100%. As  WSD aluminium stearate the content of large, but the nature of the resin often determines the nature of plastic, so people often plastic resin as a synonym . For example, polyvinyl chloride resin and PVC , phenolic resin and phenolic confused. In fact, resins and plastics are two different concepts. Original polymer resin is a raw , it is not only used to make plastics , but also coatings, adhesives and synthetic materials. In addition to the very small number of plastic resin containing 100% , the majority of plastics , in addition to the main component of the resin , but also need to add other substances.
2 , also known as filler of fillers , which can improve the strength and resistance to heat , and cost . E.g. a phenolic resin is added after the flour can greatly reduce costs, the most inexpensive one phenolic plastics , as well as significantly improved mechanical strength. The filler may be divided into two types of inorganic fillers and organic fillers , such as wood flour former , rags , paper and various textile fibers , which, as glass fibers, diatomaceous earth , asbestos , carbon black and the like.
3 , a plasticizer , and a plasticizer to increase the flexibility of the plastic plasticity , reducing brittleness , so that the plastic processibility . Plasticizers are generally miscible with the resin , non-toxic , odorless, light, heat stable, high boiling point organic compounds, the most commonly used phthalates . E.g., the production of PVC , plasticizer , if adding more soft PVC can be obtained , if not add plasticizers or less (the amount of < 10% ) , then a rigid PVC .
4 , a stabilizer to prevent the WSD Chrolinated polyethylene  synthetic resin by the action of light and heat during use in the processing and decomposition and destruction, extended service life , to add the stabilizer in plastics . Commonly used are stearates, such as epoxy resin .
5 , plastic colorant colorants can have a variety of bright , beautiful colors. The organic dyes and inorganic pigments used as a colorant . Specialty Plastics
6 , the lubricant is to prevent the lubricant in the molding of plastic stick on the metal mold, while allowing a smooth plastic surface appearance . Commonly used lubricants are stearic acid , calcium and magnesium salts and the like .
7 antioxidants prevent the plastic molding or WSD Chlorinated paraffin  heating at high temperature thermal oxidation during use , leaving yellow plastic , hair crack , etc. In addition to the above additives , the plastic may also be added flame retardants, foaming agents, antistatic agents so as to meet different requirements .

2013年8月18日星期日

Calcium stearate coated sand is to be applied

Lubricant coated sand is usually calcium stearate coated sand its fluidity,

caking resistance, gas evolution, has antimony trioxide  an impact strength and thermal

toughness. Calcium stearate coating evenly distributed in the sand, in the

core-temperature softening resin, and calcium stearate has melted, forming

a network interpenetrated softness of the resin increases, increasing the

deflection of the shell and thus lead to thermal toughness increases.

Calcium stearate-coated sand to improve lubricity fluidity that compaction

of the sand core is increased, thereby increasing the strength of the core.

Calcium stearate 60-80 degrees higher than the resin melting point, heat

softened after calcium stearate time later than the resin, dispersed in the

sand is not melted in a range of calcium stearate skeleton played a role in

the resin soften the sand barrier during settlement, reducing the formation

of voids and sand core expansion tendencies. But also can play a role in

improving the melting point of coated sand. Calcium stearate coated sand

can improve thermal cracking, thermal cracking of coated sand was mainly

due to thermal expansion and  red iron oxide thermal shock stress, with the increase in the

amount of calcium stearate, thermal cracking time gradually delayed, the

reason melting point higher than that of calcium stearate resin which

increases the sand core to improve the thermoplastic advantageous, whereby

relaxation of the thermal stress of the  tio2 anatase sand core. Calcium stearate was

added in the amount of coated sand although rarely, but the effect is very

large, to prevent caking of the coated sand, improve mobility, improve the

resistance of the shell and mold release. Calcium stearate coated sand not

only affect the quality of the strength of the coated sand temperature

performance is also crucial ten million can not be discounted. Calcium

stearate was added in the synthesis of a greater amount of silica can be

increased calcium stearate-coated sand in the high temperature performance.

2013年8月7日星期三

The synergistic effect of zinc borate

In the inorganic flame retardants, aluminum hydroxide flame retardant, smoke, filling three kinds of functions, because non-volatile, non-toxic, but also with a variety of substances produced synergistic effect, known as the inorganic pollution resistance flame retardants, but the use of aluminum hydroxide is usually necessary to add 50% (mass

Volume fraction) or more to show a good flame-retardant effect. Magnesium hydroxide and aluminum hydroxide in the case, this will add to the base resin due to the large deterioration of processability, mechanical properties losses. Antimony trioxide is an essential co-halogen flame retardant agent,

However, when used alone has little effect fire. Due to the higher zinc borate dehydration temperature (greater than 300 ℃), over most of the decomposition temperature of the polymer, antimony trioxide can be used in place of all or part of thermosetting polyester formulations, reduces the cost, but also

With aluminum hydroxide, magnesium hydroxide, and phosphorus-based flame retardants produce good synergistic effect, thereby reducing the amount of these additives, reducing their processing properties of the substrate.
In the study of zinc borate and magnesium hydroxide, aluminum hydroxide, antimony trioxide, chlorinated paraffin flame retardant in the low-density polyethylene Synergistion found zinc borate flame retardant flame retardant system with either complex or with the compound with halogen flame retardant system, can achieve good flame effect

Fruit, and reduce the amount of other flame retardants, to improve the processing properties of the material.

The basic purpose of zinc borate

Low-hydrated zinc borate according to its characteristics, mainly used in high-rise buildings of rubber parts, elevators, cables, wires, plastic sheath, temporary buildings, military products, plastics, TV housings and spare parts, marine coatings and synthetic fibers . In addition, boric acid

Zinc corrosion protection also has a unique and powerful cost-effective corrosion resistance, can be used as multi-functional inorganic anticorrosive pigment instead of toxic lead, chromium rust paint. It is released from the metal surface borate ion, ferrous metal surface adsorbed ions of oxygen in the air

Under the action of oxidation of iron ions, and borate ions form insoluble stable, dense, complex salts of the passivation film, to prevent rusting of metal. David M, Schuber also studied zinc borate flame retardant as a multifunctional mechanism of action of anti-corrosion paints and coatings in the various areas, as

The application domain. Study found that zinc borate flux can be used as a strong ceramic, suitable for low-temperature fast firing process. Billet, glaze slurry introducing zinc borate can improve the performance of the glaze firing temperature, significantly improve the quality of the product. In addition, prepared by high-temperature solid-phase reaction of boron

Zinc, the present study is more than can be used as the light emitting material Zn3 (BO3) 2. Therefore, zinc borate increasingly broad range of applications, along with its in new areas of research and development, some of the irreplaceable advantages have been demonstrated.

Low-hydrated zinc borate flame retardant mechanism

Into organic flame retardants and inorganic flame retardants organic flame retardants include halogen, phosphorus and halogen - phosphorus; inorganic flame retardants are aluminum hydroxide, antimony trioxide, magnesium hydroxide , zinc borate, etc. of the inorganic flame retardants, antimony trioxide greater consumption,

But because it can not smoke suppression also has some toxicity, and therefore its use is subject to certain restrictions. Currently, there has been non-flame retardant antimony technology trends, can replace some or all of antimony trioxide flame retardant mainly zinc borate, tin, zinc, molybdenum compounds, etc. According to statistics, the occurrence of

Deaths caused by fire, 80% of which is generated by combustion of materials caused by smoke and toxic gases, therefore, in addition to having excellent flame retardant effect, low toxicity, low smoke also its essential properties borate zinc as an environmentally friendly inorganic flame retardant, with

Non-toxic, pollution-free, flame retardant and smoke suppression of excellent performance, especially low-hydrated zinc borate (2ZnO3B2O33.5H2O) after the advent gradually been widely applied. Zinc borate and other flame retardants (antimony trioxide, aluminum hydroxide etc.) complex to use, can significantly improve their smoke suppression, resistance

Combustion performance, with good market prospects.
Low-hydrated zinc borate flame retardant mechanism
1.1 Physical Properties lower hydrated zinc borate as a white crystalline powder, melting point 980 ℃, density of 2.71 × 103kg/m3, refractive index 1.58, a molecular weight of 434.66, toxicity LD50 (oral, rat)>, no toxic inhalation and contact the skin, the eyes do not produce irritation, no

Corrosive; insoluble in water, soluble in hydrochloric acid, sulfuric acid and dimethyl sulfoxide, soluble complexes generate ammonia; insoluble in ethanol, n-butanol, benzene and other organic solvents; heated to about 290 ℃ begins to lose crystal water, to 600 ℃, completely lost crystal water.
1.2 retardant plastic pyrolysis release mechanism H, and R radicals, H and the active oxygen in the air to generate a great HO, the rapid expansion of the flame can, both the formation of chain reaction H (resulting pyrolysis) + O2 → HO + O CO (pyrolysis proceeds) + HO → CO2 + H Thus, flame retardants should reach

To flame purpose, you need to: ① to reduce the temperature of ignition, preventing polymer pyrolysis of H and R radicals; ② able to cut off the air; ③ able to capture the activity of great HO, prevent flame expansion.
zinc borate flame retardant as a flame retardant to satisfy the above requirements, the flame retardant mechanism is:
1 heat and diluted zinc borate can be higher than 300 ℃ crystallization of water, can play a role in the cooling heat. Zinc borate, about 38% of zinc oxide, zinc hydroxide, zinc or form into the gas phase, the combustible gas is diluted so that the combustion rate decreases.
(2) forming the cover layer generally halogen flame retardant zinc borate compound and use, contact with fire and heat, the reaction equation is 2ZnO 3B2O3 3.5H2O +22 RX → 2ZnX2 +6 BX3 + 11R2O +3.5 H2O ZnX2 high boiling point, is a solid substance that can combustible material covered on the table

Isolated from the air side, inhibiting combustible gases, and also to prevent oxidation and the action of heat; contribute PVC decomposes to form an aliphatic hydrocarbon, ultimately beneficial for the dehydration reaction; acid can promote the generation of large amounts of carbon of carbon increases means combustible material escapes reduction

Have a good smoke suppression effect.
3 to prevent chain reaction when added to the zinc borate halogen polymer material, in the combustion gas generated after entering BX3 encounter with water vapor to generate HX, the flame generated radicals halogen atom, to prevent free radical inter chain reaction.

Low practical application of hydrated zinc borate

In practical applications in the rubber ZB flame, to delay the ignition timing and the rubber a "self-extinguishing smoke" to prevent sustained combustion and spread of the plastic, resin production ZB retardant is added, can be made flame retardant plastic canvas, flame phenolics, unsaturated polyesters

Glass steel tile, plastic wire and cable protection cover, etc.. ZB retardants fine granularity, good dispersion, easy to grind modulated into paint, storage stability, in terms rust retardant additives have greater advantages than the existing [9] borate zinc and traditional flame retardant compound used can significantly raise

High performance flame-retardant and smoke suppression. zinc borate and antimony trioxide obtained when used PVC cable sheath, the oxygen index increased from the original 24 to 32 to 34. zinc borate flame retardant and antimony trioxide to (a ~ 3): 1 ratio to the halogen-containing resin, not only improve the flame resistance, and reduces with

Burning smoke halogen-free resin 25% of PVC containing 2ZnO3B2O3 3.5H2O carbides formed at 650 ℃ contains the original 80% boron, and 62% zinc, zinc catalytic dehydrochlorination of PVC, PVC cross-linked into the carbon layer, 2ZnO3B2O3 .5 H2O and halogen-containing materials such as bromine-containing polyesters,

Nylon, epoxy resins flame-retardant synergistic effect from [10]; it is in the non-halogen material such as ethylene - vinyl acetate copolymer, polyethylene, styrene, polyvinyl chloride, epoxy, acrylic, synthetic rubber and aluminum hydroxide can also play a synergistic flame retardant and smoke suppression effect, and

Filler can improve the performance of, inhibit dripping, to improve their mechanical properties .2 ZnO3B2O33.5H2O with Sb2O3 and Al (OH) 3 at the same time complex, can reduce the amount of Sb2O3, and better flame-retardant effect. Accordingly unsaturated polyester , epoxy resin, PBT, PET, PA, polysulfone,

Phenyl ether, ethylene - vinyl acetate copolymers, ethylene acrylate copolymers, polyethylene, ABS, polyurethane, polycarbonate, EPDM, acrylic very widely used in the silicone rubber, silicon-containing polymer in a single cable material 2ZnO3B2O33. 5H2O itself is an excellent

Retardant smoke suppressant