With the rapid development of industrial technology , foreign to all kinds of hard PVC products as raw materials ( such as tubes, sheets, plates , profiles , etc. ) have been developed rapidly , and these WSD Titanium dioxide rutile different hardware products due to different processing equipment and technology needs , whether it is the lubricant for PVC from the variety and quantity requirements are made more so , this demand will continue to promote the development and production of lubricant products.
Pvc Pvc products in the lubricant as a vital aid, it is compatible with PVC resin is very good , often mixed with resins, reduce WSD stearic acid the melt viscosity of the resin to improve its liquidity. Such as butyl stearate , lead stearate lubricant is often used within pvc. Wherein the lubricant is stearic acid salts as well , and are effective stabilizers, and therefore play an essential role in the production process of pvc products . The plastics industry professionals also said that according to the PVC lubricant compatibility with PVC resin by other additives ( especially by other lubricants ) and change impact of the WSD Chlorinated paraffin phenomenon and the different materials, PVC products must have an appropriate plasticizing degree raised this important guide and external lubrication balance. Pvc internal and external lubricant in the direction of future development , and according to this guidance for the design and production of PVC lubricant inside and outside work . In order to better assist the lubricant pvc products ( especially hard pvc products ) in the production process , thus ensuring a smooth and efficient production .
WSD Chemical is specificaitonal manufacturing plastic chemical in china for 10 years, WSD intenal lubricant and supply all kinds plasic chemicals ,such as Metal soaps, PVC heat stabilizers,PVC plasticizer, Impact modifier,plastic lubricant processing aid , PVC lubricant flame retardant, pigments and optical brightener.
2014年3月11日星期二
2014年3月9日星期日
intenal lubricant use some of the rules
(1) Lubrication focus in extrusion, injection and other processing within
the lubrication in rolling processing outside the focus. (2) the use of
copolymer resin, an additional external lubricant than pure PVC resin.
(3) the formulation should note the WSD one pack stabilizer following:
① hard than soft lubricant consumption.
② to pay attention to the inherent slip stabilizers. ③ filler amount is
large, the use of large amounts of lubricants; ④ attention inside and
outside lubrication lubrication balance.
⑤ product performance requirements, such as surface appearance,
mechanical properties and hot.
After the excess amount, due to pressure from the lower extrusion die
leaving the film was blown; (1) the amount WSD Stabilizers for pipe of blow molding too little
lubricant can cause mold and thin-film layer between the adhesive stick,
causing processing difficulties: for example as follows cracking in the
seams. Add appropriate lubricants such as stearic acid monoglyceride is
advantageous, the amount is generally not more than 1% (2) precipitates
easily processed with the formulation should be considered a strong
binding force to the metal lubricant is formed like a lubricant agent
films (such as paraffin). (3) cable with plastic products, electrical
properties and generally require a higher quality stability, generally use
only acid soap as a lubricant. Because stearic acid has a corrosive effect
on metal wire, it is generally not.
(4) a metal soap as a lubricant may be, but WSD Azodicarbonamide not excessive amount of HCl
due to the effect of soaps and free fatty acids can lead to increased
blooming phenomenon. Also note the strong lead stearate lubricant, when
the amount of excess plastic hard plasticizers, calcium stearate at high
temperatures but stick Kun.
the lubrication in rolling processing outside the focus. (2) the use of
copolymer resin, an additional external lubricant than pure PVC resin.
(3) the formulation should note the WSD one pack stabilizer following:
① hard than soft lubricant consumption.
② to pay attention to the inherent slip stabilizers. ③ filler amount is
large, the use of large amounts of lubricants; ④ attention inside and
outside lubrication lubrication balance.
⑤ product performance requirements, such as surface appearance,
mechanical properties and hot.
After the excess amount, due to pressure from the lower extrusion die
leaving the film was blown; (1) the amount WSD Stabilizers for pipe of blow molding too little
lubricant can cause mold and thin-film layer between the adhesive stick,
causing processing difficulties: for example as follows cracking in the
seams. Add appropriate lubricants such as stearic acid monoglyceride is
advantageous, the amount is generally not more than 1% (2) precipitates
easily processed with the formulation should be considered a strong
binding force to the metal lubricant is formed like a lubricant agent
films (such as paraffin). (3) cable with plastic products, electrical
properties and generally require a higher quality stability, generally use
only acid soap as a lubricant. Because stearic acid has a corrosive effect
on metal wire, it is generally not.
(4) a metal soap as a lubricant may be, but WSD Azodicarbonamide not excessive amount of HCl
due to the effect of soaps and free fatty acids can lead to increased
blooming phenomenon. Also note the strong lead stearate lubricant, when
the amount of excess plastic hard plasticizers, calcium stearate at high
temperatures but stick Kun.
2014年3月6日星期四
Select the general principles of PVC lubricants
As mentioned above, must be reasonable taking into account the liquidity, the rate of anti-sticking and plasticized PVC resin. That is certain to make the external lubrication balanced economy can achieve the purpose of continuous production . Research and practice show that : it is not 100% plasticized best quality products , the highest mechanical WSD Stabilizers for pipe properties [ 8 , 9 ] . Moreover , for a number of reasons, the degree of plasticization of the different products have different requirements. Incomplete plasticizing , not only of good quality , high yield, low energy consumption, and can reduce the amount of heat stabilizers , help reduce costs and increase production. In full consideration of heat stabilizers and other additives for lubricants and other factors affecting the premise , through the adjustment of external lubricant variety and quantity can be regulated plasticizing rate, increased resin flow and improve adhesion. Selection Lubrication System General Experimental Procedure ( a ) standard sample
With a processing performance , high quality equipment in the same class of the same type of high-speed mixing material products , with a torque rheometer experiment . Test its plasticizing time , when plasticizing plasticizing peak torque and peak width and slope after slope . Then WSD Chrolinated polyethylene the adjustment , external lubricant varieties and quantities to match the standard sample as close as possible . ( 2 ) First, to change the PVC melt flow through the variety and amount of lubricant that is changing the melt viscosity ( plasticized torque value ) ( 3 ) under basic adjust melt viscosity ( plasticized torque value ) of the premise, through changes in external lubricant varieties and quantity adjustments plasticizing time ( ie plasticizing rate ) . Of course, the number of external lubricant change or change their species, the peak is also affected by the plasticizer . ( 4 ) After the release of liquidity , plasticizing time ( rate ) basically satisfied with the melt, should examine the adequacy of anti- adhesion , anti-sticking , if still insufficient , may be appropriate to scale up the inner and outer lubricant consumption. If the release of already feeling ( non-stick rheometer rotor mixing head ) , indicating that there may be an excess amount of lubricant ( which is balanced by a high level of lubrication ) , may be appropriate to reduce the number of internal and external lubricant in an amount up to up slightly tacky . On the basis of the appropriate number of additional internal and external lubricant is that it is not sticky , it is balanced by a lower level of lubrication is closer to the equilibrium level of practical application of lubrication . Although a high level of lubrication average system can improve the thermal stability of PVC , reducing the amount of heat stabilizers reduce formulation costs , but external lubricant precipitation phenomenon may be more severe , continuous production adversely . Meanwhile , it is possible that the rate of increase in downtime , reduced productivity , increased scrap rates , increasing the production costs and the inconvenience of many operations and may WSD Aluminum hydroxide affect the performance of secondary processing . ( 5 ) enlarge the recipe above experiments were initially identified in the production of amplification tests found any deficiencies , then targeted adjustment system , so repeated several times to design a more satisfactory balance lubrication system, to achieve economic , the purpose of continuous production of quality products . If there is no standard formula , you can ask for the heat stabilizer or lubricant manufacturer reference formulation , pilot production by reference to a formula , to identify problems , and then refer to the recipe to make Brabender rheological experiments , as described above with reference to the rheological test results program improvement, or use cheaper products for the original reference lubricant formulations be replaced. Effects of experimental data on the proportion of actual production volume of material due to the large amount of experimental material produced too poor, laboratory equipment too different from the actual production equipment , experiment materials and large-scale production of materials suffered heat and shear force experience the difference is too big and other reasons, from the experimental data obtained torque rheometer have slight differences are likely to have a serious impact on the large-scale production . Here are the results of the three formulations and circumstances in production for reference formula is # 1 with a parallel twin-screw factory in Shandong normal production tubing mixes measured data . 2 # recipe is a heat stabilizer foreign company recommended formula , allegedly in the United States has been widely used in conical twin screw extruder organotin heat stabilizers pipe, but in parallel twin -screw extruder , only in far lower than the normal speed in order to produce qualified pipe, host a speed slightly improved , that would be too large due to host torque automatic alarm , not the normal production . Analysis of the experimental data above : 1 # 2 # recipe formulation than the plasticizing time short 12s, ie 414 % of the time is short ; although plasticized formulations torque 2 # 1 # recipe only larger than 2%. However, in the actual production for the difference is very large . 3 # # recipe is the author of two formulations based on the improved formulation , plasticizing time 3 # 1 # extend over 20s, to extend the 7% ; plasticizing torque than 1 # 3 # Small 013N · m, smaller 018% . Results 3 # recipe can normally use parallel twin -screw extruder qualified pipe.
With a processing performance , high quality equipment in the same class of the same type of high-speed mixing material products , with a torque rheometer experiment . Test its plasticizing time , when plasticizing plasticizing peak torque and peak width and slope after slope . Then WSD Chrolinated polyethylene the adjustment , external lubricant varieties and quantities to match the standard sample as close as possible . ( 2 ) First, to change the PVC melt flow through the variety and amount of lubricant that is changing the melt viscosity ( plasticized torque value ) ( 3 ) under basic adjust melt viscosity ( plasticized torque value ) of the premise, through changes in external lubricant varieties and quantity adjustments plasticizing time ( ie plasticizing rate ) . Of course, the number of external lubricant change or change their species, the peak is also affected by the plasticizer . ( 4 ) After the release of liquidity , plasticizing time ( rate ) basically satisfied with the melt, should examine the adequacy of anti- adhesion , anti-sticking , if still insufficient , may be appropriate to scale up the inner and outer lubricant consumption. If the release of already feeling ( non-stick rheometer rotor mixing head ) , indicating that there may be an excess amount of lubricant ( which is balanced by a high level of lubrication ) , may be appropriate to reduce the number of internal and external lubricant in an amount up to up slightly tacky . On the basis of the appropriate number of additional internal and external lubricant is that it is not sticky , it is balanced by a lower level of lubrication is closer to the equilibrium level of practical application of lubrication . Although a high level of lubrication average system can improve the thermal stability of PVC , reducing the amount of heat stabilizers reduce formulation costs , but external lubricant precipitation phenomenon may be more severe , continuous production adversely . Meanwhile , it is possible that the rate of increase in downtime , reduced productivity , increased scrap rates , increasing the production costs and the inconvenience of many operations and may WSD Aluminum hydroxide affect the performance of secondary processing . ( 5 ) enlarge the recipe above experiments were initially identified in the production of amplification tests found any deficiencies , then targeted adjustment system , so repeated several times to design a more satisfactory balance lubrication system, to achieve economic , the purpose of continuous production of quality products . If there is no standard formula , you can ask for the heat stabilizer or lubricant manufacturer reference formulation , pilot production by reference to a formula , to identify problems , and then refer to the recipe to make Brabender rheological experiments , as described above with reference to the rheological test results program improvement, or use cheaper products for the original reference lubricant formulations be replaced. Effects of experimental data on the proportion of actual production volume of material due to the large amount of experimental material produced too poor, laboratory equipment too different from the actual production equipment , experiment materials and large-scale production of materials suffered heat and shear force experience the difference is too big and other reasons, from the experimental data obtained torque rheometer have slight differences are likely to have a serious impact on the large-scale production . Here are the results of the three formulations and circumstances in production for reference formula is # 1 with a parallel twin-screw factory in Shandong normal production tubing mixes measured data . 2 # recipe is a heat stabilizer foreign company recommended formula , allegedly in the United States has been widely used in conical twin screw extruder organotin heat stabilizers pipe, but in parallel twin -screw extruder , only in far lower than the normal speed in order to produce qualified pipe, host a speed slightly improved , that would be too large due to host torque automatic alarm , not the normal production . Analysis of the experimental data above : 1 # 2 # recipe formulation than the plasticizing time short 12s, ie 414 % of the time is short ; although plasticized formulations torque 2 # 1 # recipe only larger than 2%. However, in the actual production for the difference is very large . 3 # # recipe is the author of two formulations based on the improved formulation , plasticizing time 3 # 1 # extend over 20s, to extend the 7% ; plasticizing torque than 1 # 3 # Small 013N · m, smaller 018% . Results 3 # recipe can normally use parallel twin -screw extruder qualified pipe.
2014年3月3日星期一
Introduce some PVC flame retardant technology
Generated a lot of smoke when burning machine toxic gas , people poisoning, serious cause great harm to the human body . The flammability of plastic products bring to our lives a great security risk, therefore , the development of a class of flame retardant products that WSD PVC flame retardant can be added to plastic products , play a retardant effect is the vast number of plastic products manufacturers and people requirements. Environment and conditions for combustion , flame retardant products are appropriate to develop it. Our analysis is the first element of the combustion heat, oxygen and fuel. Flame through endothermic effect, covering the role of several chain reaction mechanism , the role of non-combustible gases , such as suffocation inhibition play retardant effect.
For certain requirements added flame retardants used , without compromising the physical properties of plastics. With weather resistance , durability , and even lower prices , so as to use a wide range . 1 , so that combustibles charring flame retardant , flame retardant to achieve the effect . This flame-retardant effect is mainly play a role in the WSD Chrolinated polyethylene solid phase , flame retardant materials in this category are mainly phosphorus-based flame retardant ( including organic and inorganic phosphorus- phosphorus-based ) .
2 , flame retardants to form non-volatile diaphragm under fire conditions , isolated from the air to reach retardant purposes. This flame-retardant effect is mainly play a role in the liquid phase. Retardant materials in this category are mainly borates, halides, phosphorus , and antimony oxide -based material , or to reflect each of these types of substances generated between the materials .
3 , the hydroxyl radical decomposition WSD Aluminum hydroxide products retardant chain reaction
Flame should be cut so as to achieve the purpose . This flame-retardant effect is mainly play a role in the gas phase. This type of material is mainly play a role in the gas phase. Such fire-retardant material is mainly halide and antimony trioxide.
For certain requirements added flame retardants used , without compromising the physical properties of plastics. With weather resistance , durability , and even lower prices , so as to use a wide range . 1 , so that combustibles charring flame retardant , flame retardant to achieve the effect . This flame-retardant effect is mainly play a role in the WSD Chrolinated polyethylene solid phase , flame retardant materials in this category are mainly phosphorus-based flame retardant ( including organic and inorganic phosphorus- phosphorus-based ) .
2 , flame retardants to form non-volatile diaphragm under fire conditions , isolated from the air to reach retardant purposes. This flame-retardant effect is mainly play a role in the liquid phase. Retardant materials in this category are mainly borates, halides, phosphorus , and antimony oxide -based material , or to reflect each of these types of substances generated between the materials .
3 , the hydroxyl radical decomposition WSD Aluminum hydroxide products retardant chain reaction
Flame should be cut so as to achieve the purpose . This flame-retardant effect is mainly play a role in the gas phase. This type of material is mainly play a role in the gas phase. Such fire-retardant material is mainly halide and antimony trioxide.
2014年3月2日星期日
Some major upgrade of the performance of PVC lubricant
Efficient and environmentally friendly non-toxic polymer composite lubrication is Jianhong lubricant formulations plant the introduction of international advanced technology and processes , using WSD PVC stabilizer imported raw materials and foreign PVC plastic manufacturing process and material properties , polymer developed excellent internal and external lubricant. Overcome the lack of trouble and slip agents processing performance on the traditional monomer . Add this product safe to use, easy to mix , more stable performance , reasonable adjustment formula in the case , has the following remarkable properties: 1 , reducing the coefficient of friction between molecules and promote plasticizing , stable and appropriate to reduce the amount of system products ; has good off film effects , enhance surface finish and scratch resistance ; 2 wide melting range of this product , significantly improved PVC material processing flow freely and not sticky , thus WSD Aluminum hydroxide increase productivity , reduce equipment wear and energy consumption, reduce the rate of non-performing products ; 3 , significantly improved fillers , pigments and other additives in the PVC dispersion resin , may be a corresponding increase in the amount of filler , and to products, color stability, gloss increases ; 4, the product in the processing of PVC both in front of and outside the latter lubrication within the recommended dosage is not blooming , no precipitation , with good WSD PVC flame retardant stability. Efficient and environmentally friendly non-toxic polymer composite lubrication P-80A Scope: nontoxic polymer composite efficient lubrication P-80A is widely used in non-transparent sheet, plate , wire and cable , pipe fittings , profiles and other furniture edge banding class PVC products.
2014年2月27日星期四
The main role of dibasic lead phosphite
English name : Dibasic lead Phosphite
MF : 2PbO · PbHPO3 · H2O
Properties: white or slightly yellow powder. Sweet poisonous. Density of 6.1 , the refractive index of 2.25 , at about 200 ℃ becomes gray and black , about 450 ℃ turns yellow . And all of the water-insoluble WSD aluminium stearate organic solvent , dissolved in hydrochloric acid , nitric acid. Has excellent weather resistance properties , thermal stability, electrical insulating properties , and resistance to oxidation and ultraviolet shielding performance.
Uses : polyvinyl chloride and polyvinyl chloride / polyethylene copolymer heat stabilizer. Mainly used for opaque hard and soft WSD Titanium dioxide rutile goods, especially outdoor cables, building panels , corrugated sheet , pipe and so on. Dihydrochloride ( short) is a monomer lead salt , lead salt stabilizer is a composite material , the effect is not used alone , the need for different uses , tribasic lead sulfate was added , and the lead oxide in the formulation can lead stearate use the successful application of nano-scale high-purity rare earth elements BAUER (BAOHUA) efficient , non-toxic calcium zinc stabilizers rare in an efficient , high WSD PVC flame retardant environmental known. No smell, dispersibility , fluidity, stability, weather resistance , and excellent transparency . Is the best environmental alternative to organic tin compound lead, lead and rare earth compound stabilizer .
MF : 2PbO · PbHPO3 · H2O
Properties: white or slightly yellow powder. Sweet poisonous. Density of 6.1 , the refractive index of 2.25 , at about 200 ℃ becomes gray and black , about 450 ℃ turns yellow . And all of the water-insoluble WSD aluminium stearate organic solvent , dissolved in hydrochloric acid , nitric acid. Has excellent weather resistance properties , thermal stability, electrical insulating properties , and resistance to oxidation and ultraviolet shielding performance.
Uses : polyvinyl chloride and polyvinyl chloride / polyethylene copolymer heat stabilizer. Mainly used for opaque hard and soft WSD Titanium dioxide rutile goods, especially outdoor cables, building panels , corrugated sheet , pipe and so on. Dihydrochloride ( short) is a monomer lead salt , lead salt stabilizer is a composite material , the effect is not used alone , the need for different uses , tribasic lead sulfate was added , and the lead oxide in the formulation can lead stearate use the successful application of nano-scale high-purity rare earth elements BAUER (BAOHUA) efficient , non-toxic calcium zinc stabilizers rare in an efficient , high WSD PVC flame retardant environmental known. No smell, dispersibility , fluidity, stability, weather resistance , and excellent transparency . Is the best environmental alternative to organic tin compound lead, lead and rare earth compound stabilizer .
2014年2月25日星期二
Some simple analysis of heat stabilizer for shoes
A) cadmium, zinc soap is typical of early-type heat stabilizers, can quickly absorb HCL, and effectively substituted with carboxylate PVC unstable chlorine atom in the catalytic chain Cd, Zn, thereby effectively suppressing early degradation and coloring , but because of the WSD Plastic impact modifier consumption of fast and transformation products CdC12, ZnC12, but also off the HCL efficient catalyst PVC, PVC and thus lead to the degradation of the material suddenly vicious black, so poor long-term thermal stability.
2) barium, calcium soaps are typically long-term thermal stabilizers, absorption HCL function only and therefore can not inhibit coloring PVC, but the conversion product BaC12, CaC12 do not have WSD zinc stearate catalytic activity, does not cause a sudden black PVC, long-term heat stability better.
3) fatty acids, organic tin are intermediate, both absorption HCL, can effectively replace with carboxylate unstable chlorine atoms PVC chain, and transformation products do not have catalytic activity.
4) mercaptan organotin it has versatile features, while a variety of mechanisms can stabilize PVC, transformation products do not WSD Polyethylene wax have catalytic activity, and therefore both excellent initial and long-term thermal stability effect. First of cadmium and zinc compounds are used as stabilizers because of their transparency, and can maintain the original color of PVC products. Long term thermal stability provided by the pot is much smaller than the barium and zinc compounds. They tend to be very small in the case of threatened or without warning, suddenly completely degraded.
2) barium, calcium soaps are typically long-term thermal stabilizers, absorption HCL function only and therefore can not inhibit coloring PVC, but the conversion product BaC12, CaC12 do not have WSD zinc stearate catalytic activity, does not cause a sudden black PVC, long-term heat stability better.
3) fatty acids, organic tin are intermediate, both absorption HCL, can effectively replace with carboxylate unstable chlorine atoms PVC chain, and transformation products do not have catalytic activity.
4) mercaptan organotin it has versatile features, while a variety of mechanisms can stabilize PVC, transformation products do not WSD Polyethylene wax have catalytic activity, and therefore both excellent initial and long-term thermal stability effect. First of cadmium and zinc compounds are used as stabilizers because of their transparency, and can maintain the original color of PVC products. Long term thermal stability provided by the pot is much smaller than the barium and zinc compounds. They tend to be very small in the case of threatened or without warning, suddenly completely degraded.
订阅:
博文 (Atom)