intenal lubricant is essential for PVC processing aids

Lubricants are essential in PVC processing aid. Add the right amount of lubricant in PVC can reduce friction between macromolecules PVC and PVC particles melt before the melt; reduce friction between the PVC melt plastic mechanical contact with the surface. PVC amount of lubricant can improve melt flow, increase productivity, and to prevent friction and heat caused by PVC
Degradation, improve product appearance quality. By WSD Stabilizers for pipe  function can be divided into external lubricant and the lubricant. PVC with poor external lubricant, easily migrate to the surface of the resin inside the melt, forming an interface layer of lubricant, thereby reducing the friction between the particles P PVC melt and the molten plastic prior to the mechanical contact between the faces. Lubricants containing a polar group, and has good compatibility with PVC, PVC can reduce inter-molecular forces, reduce melt viscosity and improve the melt fluidity.
Lubricant inside and outside of the points but relatively speaking, there is no strict criteria for the classification. Resin in WSD PVC lubricants  different polarities, the effect of external lubricants may change.
Such as stearic alcohol, stearic acid amine, butyl stearate, and stearic acid monoglyceride polar resin (such as PVC, PA) made, within lubrication, but for non-polar resin (such as PE
, PP), the outer displayed lubrication. Conversely, with a polar polymer such as paraffin resin phase difference, such as in a polar
PVC used as external lubricant applications: PVC lubricants in the plastics industry as the main mold release agents, plasticizers, antistatic agents, especially for plastic foam products, anti-shrinkage agents. In the production of PVC products as lubricants, and  WSD Polyethylene wax alkyd resin can be used as a modifier, a plasticizer of cellulose nitrate. A lubricant in the resin to improve the flowability and plastic processing products releasability to prevent the adhesion of the mold cavity or within the defects. General increase in the mold cavity plastic or coated surfaces. Common lubricants are fatty acids and their salts, long chain aliphatic hydrocarbons. Depending on the mechanism of action of lubricant can be divided into external and internal lubricant lubricants.